Top 9 Two Jaw Bearing Puller – Jaw Pullers

As an Amazon Associate I earn from qualifying purchases.

1. OTC


OTC 1022 2-Ton Reversible Jaw 'Grip-O-Matic' Puller, 2 Jaw Mechanical

OTC #ad - Center screw size - 3/8-24 x 4-7/8 inches long. Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch. Otc's 2-ton capacity, reversible gear and bearing puller enables you to remove and install parts for fast, 2-jaw, effective repairs. Maximum reach - 3-1/4 inches; maximum spread - 4 inches. Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity.
BrandOTC #ad
ManufacturerOTC #ad
Height9.5 Inches
Length2 Inches
Weight0 Pounds
Width6.1 Inches
Part Number1022
WarrantyLimited lifetime warranty



90mm, Pulley, Adjustable Two Jaw Puller Tool for Removal Small Bearing or Gears, TIOIT COEME 2 jaw Bearing Puller, and Flywheel 30mm

TIOIT COEME #ad - Have reversible claw legs make it suitable for use as an internal or external bearing puller. High quality: the 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.

Can also be used for automotive flywheel, motorcycle wheel, scooter motorcycle bearing and gear and so on. Quality assurance: 100% satisfactory service. Widely use: this 2 jaw bearing puller widely use in various bearings that are not easy to disassemble. Adjustable Diameter 30-90mm. If you're not completely satisfied, you can ask for a replacement or full refund.

We value your shopping experience and strive to offer a high-quality product and service. The reasonable design of the claw will not fall off when force is applied. Get into tight areas: this 2 jaw puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application. Adjustable: 2 jaw bearing remover can adjust the clamping depth.
ManufacturerTIOIT #ad
Part Number2 Jaw Bearing Puller-3171

3. AB Tools-US Pro


90mm by U.S.PRO Tools AT091, Thin Two jaw Bearing Puller/Remover 30mm

AB Tools-US Pro #ad - Made from Chrome Vanadium Steel. Jaw thickness: 1. 5mm. Applicable bearing dimension: 30-90mm Diameter. Working Depth: 93mm. Special Design for narrow spaces.
BrandAB Tools-US Pro #ad
ManufacturerAB Tools-US Pro #ad
Height1.57 Inches
Length6.69 Inches
Width5.91 Inches
Part NumberAT091

4. ABN


Pulley, ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, and Flywheel

ABN #ad - Built to last: no need to worry about this hub puller tool falling apart when you need it most; Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.

Perfect size: 2-jaw transmission gear puller measures 6. 25 inches 22. 2cm with jaw spread; Universal pulley puller has 4. 75-inch 12. 1cm jaw reach for your vehicle maintenance projects; Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack. Perform maintenance with ease: remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool; Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.

Optimal reach: struggling to access tight, pulleys, cramped spaces is a thing of the past; Use the small jaw puller bearing automotive gear puller Removes gears, and flywheels off of a shaft in hard-to-reach spots without damage to your application. Adjustable performance: whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
BrandABN #ad
ManufacturerABN #ad
Height1.8 Inches
Length9.75 Inches
Weight1.23 Pounds
Width6.9 Inches
Part Number9640

5. ChgImposs


ChgImposs 8 Inch CR-V Single Hook Two Claws Puller Separate Lifting Device Strengthen Bearing Puller Rama for Auto Car Repair Hand Tools

ChgImposs #ad - Made of chrome vanadium steel for strength and longevity, it is durable. Adjustable clamping depth. Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free. The reasonable design of the claws makes them not fall off when the force is applied. The tip of the ejector pin is a heat-treated rotating head without damage that is durable and labor-saving. Can be used for automotive flywheel, bicycle wheel, motorcycle wheel, car wheel, machine wheel, etc.
BrandChgImposs #ad
ManufacturerFLXDirect #ad



Adjustable Two Jaw Pilot Bearing Puller Tool Carbon Steel Pump Pulley Remover Straight Type Size : 2.5" 3545mm/1.4"1.8", Small Pulley Puller

VGEBY #ad - Guarantee : if you are not satisfied with our product received, you can apply for unconditional return and refund in the valid period12 months.

We will be the first time to reply you. Top quality: small pulley Puller is made of carbon steel material, it is durable. Convenient: adjust screw design, flexible and convenient to repaired different size gears and bearing. Professional: give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps. In terms of any problem of this product, you can send emails to us at any time. Widely use:small pulley puller will fit for automotive flywheel, bicycle wheel, motorcycle wheel, car wheel, machine wheel and so on.
BrandVGEBY #ad
ManufacturerVGEBY #ad
Part NumberBADNUWA-AMA-QC00876-01

7. TAO+


6 Inch Single Hook Two Claws Puller Separate Lifting Device

TAO+ #ad - The reasonable design of the pulling claw makes it not easy to fall off when applying force. The product is forged from chrome vanadium steel, durable, rust-proof and non-slip. Specification:pulling diameter: 95mm, screw length: 165mm, claw length: 140mm, screw diameter top: 14mm, Screw Diameter bottom: 13mm, bracket Length: 159mm, Claw Thickness: 3-5mm. Ultra-thin claw, not easy to pull bad, with elastic metal resistance, ultra-high strength, easy installation. The tip of the ejector pin is a heat-treated rotating head that does not injure other parts and is durable and labor-saving.
BrandTAO+ #ad
ManufacturerTAO+ #ad
Part NumberSB-12222

8. Shankly


Shankly Two Jaws Harmonic Bearing Puller and Gear Pulley Puller

Shankly #ad - Great wiper puller tool, gear puller, bearing puller and overall an effective puller tool for automotive mechanics. Tight squeeze, no problem: shankly’s gear puller is the perfect solution to removing objects in narrow places, helping the mechanic extract objects in tight places.

Thin but strong: while the shankly gear pulling tool is thin and nimble, it’s also crafted from heavy duty construction providing the tool strength and durability. Useful range: shankly’s bearing puller features a useful and wide range 1. 5 inches - 3.

5inches 40 - 90mm giving the user flexibility to complete many types of jobs. A pulling tool that will serve a mechanic effectively for a very long time. Multiple uses: effective solution for many tasks. Universal: shankly’s bearing puller features a wide range and thin yet strong construction, making it useful and effective for many makes and models.
BrandShankly #ad
ManufacturerShankly #ad
Part NumberD1099

9. Qiilu


Qiilu 2.5Inch Two Jaw Twin Legs Bearing Gear Puller Remover Hand Tool Removal Kit

Qiilu #ad - Application -- ideal for automotive flywheel, pump bearing generator bearing, motorcycle wheel, bicycle wheel, machine bearing etc. Precise design -- the puller can be bilateral rotation, enable laser stretching size and working space. Package included -- comes with hexagonal screw and thread for fastening, non-silp and high strength. Adjustable -- two jaw with adjustable clamping depth, fit for different size gears and bearings. High quality -- this bearing puller is made of chrome-vanadium steel, the point of the mandrill through a special heat treatment process, more solid and durable.
BrandQiilu #ad
ManufacturerQiilu #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberQL00876-01