As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

2802, Smittybilt Winch Plate for TJ/YJ/LJ factory bumpers , Black

#adSmittybilt #ad - Fits 1997 to 2006 tj wrangler, Rubicon and Unlimited. Raised winch plate to accommodate larger bumpers to eliminate roller fairlead interference. Made for 1/4 inch steel, powder coated black for long lasting durability. Supports up to a 10, 000 winch with standard bolt pattern, Mounting hardware included.

Brand	Smittybilt #ad
Manufacturer	Smittybilt #ad
Height	5 Inches
Length	39 Inches
Weight	27.6 Pounds
Width	10 Inches
Part Number	2802
Model	2802
Warranty	5-Year limited

2. Smittybilt

#ad

Smittybilt Winch Plate for TJ/YJ/LJ aftermarket bumpers, 2803,Black

#adSmittybilt #ad - Black powdercoat finish for long lasting durability. Fits 1987-2006 wrangler tJ/YJ/LJ aftermarket bumpers. Manufactured from 1/4" steel. Supports up to a 12, 000 lb Smittybilt winch. Pre-drilled holes and include mounting hardware Some cutting required on OE bumper.

Brand	Smittybilt #ad
Manufacturer	Smittybilt #ad
Height	9 Inches
Length	35 Inches
Weight	19 Pounds
Width	3 Inches
Part Number	2803
Model	2803

3. RUGCEL WINCH

#ad

Winch Mount Recovery Winches, RUGCEL WINCH 23" Cradle Winch Mounting Plate

#adRUGCEL WINCH #ad - Easy installationpackage includes hitch pin and clip, standard winch mount pattern ensure the installation is more convenient. 13, 000 large carrying capacityperfect for 8000 lb to 13000lb winches, heavy duty construction and is designed to mounting a self recovery winch to your vehicles.

Prevent rustfeatures a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state. Everyone can use this winch mounting plate easily. Standard 10" on center fairlead bolt pattern. Heavy duty steel constructionThis winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.

Brand	RUGCEL WINCH #ad
Manufacturer	RUGCEL WINCH #ad
Part Number	US0001
Model	13

4. Smittybilt

#ad

Smittybilt 2804 Textured Black Winch Mounting Plate for Jeep Stock Front Bumper

#adSmittybilt #ad - Powder coated for long lasting corrosion resistance. Tough 3/8 inch plate construction. Raised winch mount, for roller fairlead.

Brand	Smittybilt #ad
Manufacturer	Smittybilt #ad
Height	6 Inches
Length	39 Inches
Weight	30.8 Pounds
Width	18 Inches
Part Number	2804
Model	2804
Warranty	Limited Warranties Smittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

5. Smittybilt

#ad

Smittybilt 2811 Textured Black Winch Cradle for 8,000 lb., 12,000 lb. Winches

#adSmittybilt #ad - Offers variety of mounting options for front or rear installation. Designed to accommodate most winches up to 12k. Finished in a two-stage satin black powdercoat. Manufactured out of the 3/16" and 1/4" cold rolled steel. Note: battery terminals sold separately. Works with any 2" receiver hitch. Includes a mounting plate for your roller fairlead.

Brand	Smittybilt #ad
Manufacturer	Smittybilt #ad
Height	15 Inches
Length	19 Inches
Weight	21.5 Pounds
Width	5 Inches
Part Number	2811
Model	2811
Warranty	Limited Warranties Smittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

6. ECOTRIC

#ad

ECOTRIC 10x 4 1/2 Cradle Winch Mount Mounting Plate 13,000 Lb Capacity Recovery Winches with One Year Warranty

#adECOTRIC #ad - 10" on center fairlead Bolt Pattern The handles are not adjustable. Drilling may be required. Anti-rust black Powder Coat Finish. Made of 1/5" steel. Perfect for 8000 lbs to 13000 lbs Winches. 10" x 4-1/2" standard Winch Mount Pattern. It would properly accommodate a Warn winch either.

Brand	ECOTRIC #ad
Manufacturer	ego #ad
Part Number	RACK-A23
Model	5841740977

7. EAG

#ad

EAG Winch Mounting Plate for Wrangler YJ TJ LJ, 12000 lb Capacity

#adEAG #ad - Fits for 1987-2006 wrangler TJ/YJ. The raised design is perfect for oversized bumpers and eliminates roller fairlead interference. Mounting hardware included. Easy bolt-on installation. Made for 1/4 inch steel, powder coated black for long lasting durability. Mounts to factory bumpers. Will accommodate most winches on the market.

Brand	EAG #ad
Manufacturer	EAG #ad
Height	4 Inches
Length	9 Inches
Weight	22.38 Pounds
Width	35 Inches
Part Number	2802

8. Stark USA

#ad

Stark Universal 36" inch Winch Mounting Plate 13000 lb Capacity Mount Bracket Recovery Winch Truck Trailer ATV

#adStark USA #ad - Heavy duty steel construction - Our winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan. Large carrying capacity - perfect for 8000 lb to 13000 lb Winches, solid steel construction with one-piece fully welded design for extra strength.

As well as 10" on center fairlead bolt pattern and 10" x 4-1/2" standard winch mount pattern ensure the installation is more convenient. Recommended use - provides a secure platform to accommodate larger bumpers to eliminate roller fairlead interference & multiple mounting holes fit a variety of winches. Prevent rust design - features a durable black powder coating, even put it outdoor or wet by rain for a long time, it can be guaranteed not to rust easily and keep the original state. Easy installation - pre-drilled, it's perfectly match with original mounting holes, no modification required.

Brand	Stark USA #ad
Manufacturer	Stark USA #ad
Height	3.5 Inches
Length	7.25 Inches
Weight	19.84 Pounds
Width	36.25 Inches
Part Number	25085

9. Pismire

#ad

RUGCEL Winch Mounting Plate Compatible w/ 1987-2006 Wrangler LJ 23"

#adPismire #ad - 13, 000 large carrying capacityperfect for 8000 lb to 13000lb winches, heavy duty construction and is designed to mounting a self recovery winch to your vehicles.

Standard 10" on center fairlead bolt pattern. Heavy duty steel constructionThis winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan. Everyone can use this winch mounting plate easily. Easy installationpackage includes hitch pin and clip, standard winch mount pattern ensure the installation is more convenient. Prevent rustfeatures a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.

Brand	Pismire #ad
Manufacturer	Pismire #ad