Top 9 Power Steering Hose – Automotive Replacement Power Steering Pressure Hoses

As an Amazon Associate I earn from qualifying purchases.

1. Sunsong

#ad

Sunsong 3401209 Power Steering Pressure Line Hose Assembly

#ad
Sunsong #ad - This provides exceptional durability and long life. Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.

Pressure hoses exceed original equipment performance standards sae j2050 with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. All tubing is manufactured from high grade Steel and electroplated with a zinc coating chromium III, delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.

Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Each hose is precision engineered to exact fit and Includes brackets, switch ports, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
BrandSunsong #ad
ManufacturerSunsong #ad
Height2.8 Inches
Length31.5 Inches
Weight1.1 Pounds
Width11 Inches
Part Number3401209
Model3401209

2. Sunsong

#ad

Sunsong 3401230 Power Steering Pressure Hose Assembly Honda

#ad
Sunsong #ad - Pressure hoses exceed original equipment performance standards sae J188 with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. All tubing is manufactured from high grade steel and electroplated with a zinc coating chromium III, road salt, delivering superior corrosion and rust resistance against elements such as high humidity, water, and grime.

This provides exceptional durability and long life. Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.

Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements. Each hose is precision engineered to exact fit and includes brackets, switch ports, heat shields, bushings, grommets, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
BrandSunsong #ad
ManufacturerSunsong #ad
Height33.5 Inches
Length18.5 Inches
Weight1.6 Pounds
Width3 Inches
Part Number3401230
Model3401230

3. SHINEHOME

#ad

55350, 366103, 53713SHJA02, 53713-SHJ-A02 Power Steering Pressure Hose Assembly for Honda Odyssey 2008 2009 2010 with Heat Shield Steering Line Hose 3401201

#ad
SHINEHOME #ad - Fitment of honda steering hosepower steering Pressure Hose Line Assembly for 2008 2009 2010 Honda Odyssey. Condition of shinehome power steering pressure hose assemblywe aims to offer you the brand new and high quality replacement without instruction, this hose is durable and long life, so professional installation is highly recommended, not easy to wear, please rest assured to buy.

Construction of honda steering pressure hosethis power steering pressure Hose Assembly is made by high grade steel and metallic finish by chrome plating, the black steering pressure hose is made of multiple layers of reinforced rubber with a highly oil resistant, it is strong resistance to corrosion and rust, ozone and heat resistant synthetic rubber coating. You will enjoy 12 months warranty and excellent customer service once you order this Power Steering Pressure Hose from SHINEHOME, we are always here and help you.

Manufacturer part number3401201, 366103, 55350, 53713SHJA02. Warranty of shinehome steering hosethe hoses have undergone high pressure quality assurance testing before leaving the factory, slick and enter "ask a question", you will see "Shinehome" on Amazon page, please contact with us in time via email, which effectively guarantees the installation and operation of new hoses.
BrandSHINEHOME #ad
ManufacturerSHINEHOME #ad
Part Number3401201
Model53713SHJA02

4. Sunsong

#ad

Sunsong 3403666 Power Steering Hose Assembly

#ad
Sunsong #ad - Providing easy installation and reduced labor time. Pressure hoses exceed oem performance standards with a Max 1500 psi working pressure, 8700 psi burst pressure rating and tensile strength of 1, 600 lb.

Hoses are pre-assembled with brackets, etc. Providing exceptional durability. Every pressure hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose. Return hoses exceed original equipment performance standards SAE J189 with a Max working pressure of 250 psi and are suitable for low pressure high temperature operations. Exact replacement of oem type pressure Hose and return Hose set.
BrandSunsong #ad
ManufacturerSunsong #ad
Height12 Inches
Length47.25 Inches
Weight3.7 Pounds
Width19.75 Inches
Part Number3403666
Model3403666

5. ACDelco

#ad

ACDelco 36-361260 Professional Power Steering Pressure Line Hose Assembly

#ad
ACDelco #ad - Fluid restrictors help absorb vibration and reduce noise. Silver heat guard helps protect hose in high-temperature areas. Double-lock beading tube end provides crimping and assists in leak prevention for hose/coupling integrity. Switch sockets allow reinstallation of original equipment pressure sensors. End-lock tabs position hose for accurate alignment and routing.
BrandACDelco #ad
ManufacturerACDelco #ad
Height3.5 Inches
Length12.3 Inches
Width9.3 Inches
Part Number36-361260
Model36-361260
Warranty24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

6. OCPTY

#ad

OCPTY Power Steering Pressure Hose Complete Assembly Fits for 2003 2004 2005 2006 Kia Sorento 575003E000 Power Steering Lines

#ad
OCPTY #ad - Replace numbers - 16228013001, 57500 3e000, 80729, 9793016. Why replace - when the steering system shows signs of leakage or inconsistent power assist, which means the power steering line for points of failure.

Please note - please check car make model trim engine, product appearance and part number to make sure this is the right part you need. Any question you have please contact us for a answer. Compatible models - power steering pressure Line Hose Assembly for 2003 2004 2005 2006 Kia Sorento. Often times, leaks will be found in the junctions between components or at the crimped connections between flexible and ridged sections. Why choose us - affordable, directly compatible and built to last, OCPTYâ€s new OE power steering hose stand out as the smart option.
BrandOCPTY #ad
ManufacturerOCPTY #ad
Height1.97 Inches
Length18.11 Inches
Width11.42 Inches
Part Number103590-5209-1454091021

7. Sunsong

#ad

Sunsong 3402350 Power Steering Pressure Line Hose Assembly

#ad
Sunsong #ad - Each hose is precision engineered to exact fit and includes brackets, heat shields, switch ports, bushings, grommets, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.

Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose. Pressure hoses exceed original equipment performance standards sae j2050 with a max working pressure of 1, 700 psi and a tensile strength of 1, 500 psi a burst pressure rating of 8, 600 lb. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, ozone, exceeding original equipment requirements.

This provides exceptional durability and long life. Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, and heat. All tubing is manufactured from high grade steel and electroplated with a zinc coating chromium III, road salt, water, delivering superior corrosion and rust resistance against elements such as high humidity, and grime.
BrandSunsong #ad
ManufacturerSunsong #ad
Height2.4 Inches
Length31.5 Inches
Weight1.3 Pounds
Width11 Inches
Part Number3402350
Model3402350

8. Podoy

#ad

53713-S87-A04 Power Steering Line Hose for Honda Accord V6 3.0L 1998-2002 OEM 365527 75018 92150

#ad
Podoy #ad - Easy to install - compatible for Honda Accord V6 3. 0l 1998-2002. Save time save money - a 100% brand new aftermarket replacement Steering Pressure Hose Assembly with premium quality. Model number - cross-reference: 979-4006, 53713-s87-a04, 92150, 53713-s80-g01, 53713s80g01, 75018, 365527, 53713s87a04, 53713s87a03, 53713-S87-A03 . Money-back guarantee - if you're not completely satisfied, you can ask for a replacement or full refund at any time. Premium quality - adopted high quality metal and plastic that meet or exceed OEM requirements. Warranty: 1 year warranty.
BrandPodoy #ad
ManufacturerPodoy #ad
Part Number10UA0675
Model10UA0675

9. Sunsong

#ad

Sunsong 3401158 Power Steering Pressure Line Hose Assembly

#ad
Sunsong #ad - This provides exceptional durability and long life. Each hose is precision engineered to exact fit and Includes brackets, bushings, grommets, heat shields, switch ports, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.

Pressure hoses exceed original equipment performance standards sae j2050 with a Max working pressure of 1, 700 psi and a tensile strength of 1, 500 psi a burst pressure rating of 8, 600 lb. Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose.

All tubing is manufactured from high grade Steel and electroplated with a zinc coating chromium III, water, road salt, delivering superior corrosion and rust resistance against elements such as high humidity, and grime. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
BrandSunsong #ad
ManufacturerSunsong #ad
Height2 Inches
Length31.5 Inches
Width11 Inches
Part Number3401158
Model3401158