Top 9 Hypoid Gear Oil API GL-5 SAE 80W-90 – Gear Oils

As an Amazon Associate I earn from qualifying purchases.

1. Lucas Oil

 #ad

Lucas Oil LUC10046 SAE 80W-90 Heavy Duty Gear Oil, 1 Gallon

#ad
Lucas Oil #ad - Affordable Solutions. Ideal for shock loading applications. Can be used in limited slip differentials. Provides rust protection.
BrandLucas Oil #ad
ManufacturerLucas Oil #ad
Height6 Inches
Length4 Inches
Weight5.9 Pounds
Width6 Inches
Part Number10046
ModelLUC10046

2. Ultralub

 #ad

Ultra1plus SAE 80W-90 Conventional Gear Oil API GL-5 1 Quart Pack of 12

#ad
Ultralub #ad - Exceptional thermal stability and resistance to high temperature oxidation. Reduced maintenance cost and longer equipment life. Extended gear and bearing life due minimal deposits. Longer seal life. Increased load carrying capability.
BrandUltralub #ad
ManufacturerUltrachem LLC #ad
Part NumberUC8090GL5

3. Valvoline

 #ad

Valvoline, VV831 High Performance SAE 80W-90 Gear Oil 1 QT

#ad
Valvoline #ad - Helps protect against gear wear from scuffing, scouring, corrosion and pitting. Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified. Protects against severe temperatures to help extend service life. Formulated with extreme-pressure additives to minimize gear wear from shock loads.
BrandValvoline #ad
ManufacturerValvoline #ad
Height11.6 Inches
Length3.38 Inches
Weight2 Pounds
Width3.38 Inches
Part NumberVV831
ModelVV831

4. Lucas Oil

 #ad

Lucas Oil LUC10043 Oil SAE 80W-90 Heavy Duty Gear Oil, 1 Quart

#ad
Lucas Oil #ad - Contains special anti-wear and lubricity agents. Fit type: Universal. Helps to control heat. Excellent for high performance and heavy-duty applications.
BrandLucas Oil #ad
ManufacturerLUCAS OIL #ad
Height3.3 Inches
Length11.75 Inches
Weight2.03 Pounds
Width3.3 Inches
Part Number10043
ModelLUC10043
Warranty1-Year Limited Warranty

5. Ultralub

 #ad

Ultra1plus SAE 80W-140 Synthetic Gear Oil API GL-5

#ad
Ultralub #ad - Prevents corrosion and rust formation. Provides excellent oxidation stability under severe operation conditions and high temperatures. Reduces the formation of varnish and sludge caused by high temperature oxidation. Excellent viscometric properties at low temperatures that provides fluidity during cold starts. Provides greater gear protection under severe operating conditions.
BrandUltralub #ad
ManufacturerUlrachem LLC #ad
Part NumberUFS80140GL5P

6. ACDelco

 #ad

ACDelco 10-4051 GL-5 80W-90 Axle Gear Oil, 23 oz

#ad
ACDelco #ad - Meets general motors specification no. Meets astm stp-512a meaning that the lubricant resists deposit formation and assists in protecting against rippling, pitting, ridging, or spalling. Meets american petroleum Institute API GL-5 specifications for use in severe conditions. 9985182 meaning that the fluid meets a wide range of external and internal specifications including SAE J306.
BrandACDelco #ad
ManufacturerACDelco #ad
Height1.1 Inches
Length7.7 Inches
Weight1.4 Pounds
Width3.4 Inches
Part Number10-4051
Model10-4051
WarrantyNo Warranty

7. Spectro Oil

 #ad

1 Liter, Spectro Oil Spectro L.HYP Hypoid Gear Oil 80w90

#ad
Spectro Oil #ad - Reduces drag, friction loss wear, and extends component life API GL-5 rated. Special ep additives to reduce Pinion gear wear. Designed for all shaft drive motorcycles w/o a wet clutch including BMW and Moto Guzzi. Petroleum based stocks. Highest density and highest V. I. Fit type: Universal Fit.
BrandSpectro Oil #ad
ManufacturerSpectro #ad
Height8.95 Inches
Length4 Inches
Weight1 Pounds
Width2.5 Inches
Part NumberL.HYP
ModelL.HYP
WarrantySee manufacturer Site

8. Mobil 1

 #ad

Mobil 1 104361 75W-90 Synthetic Gear Lube, 1 Quart Pack of 2

#ad
Mobil 1 #ad - Promotes longer seal life and Potentially extended oil drain or service intervals. Excellent rust, staining and corrosion protection of copper and its alloys.

Outstanding protection against low speed or high torque wear and against high speed scoring with capability to handle the severest driving conditions while delivering smooth efficient and reliable performance. Exceptional shear stability. Retains viscosity and film strength under severe operating conditions to prevent wear. Reduced wear with Longer component life. Reduced chatter and improved traction. Exceptional thermal stability and resistance to high temperature oxidation Extended gear and bearing life due to minimal deposits. Excellent limited-slip performance.
BrandMobil 1 #ad
ManufacturerMOBIL #ad
Weight1.98 Pounds
Part Number75W-90-2PK
Model75W-90

9. CRC

 #ad

Sta-Lube SL2473 API/GL-5 Plus New Generation Limited Slip Gear Oil, 1 Gallon

#ad
CRC #ad - Package width of The Item Is 6". Package length of The Item Is 4. 8". Highly Reliable. Package height of The Item Is 106".
BrandCRC #ad
ManufacturerSta-Lube #ad
Height10.63 Inches
Length4.75 Inches
Weight7.4 Pounds
Width6 Inches
Part NumberSL2473
ModelSL2473
WarrantyLIMITED WARRANTY

Tags: , , , , , ,