Top 9 Harmonic Balancer Installation Tool – Automotive Replacement Engine Harmonic Balancers

As an Amazon Associate I earn from qualifying purchases.

1. ProForm

#ad

ProForm 66515 Harmonic Balancer Installation Tool

#ad
ProForm #ad - Made of highly durable material. Protective washer. Pilot stud for the harmonic balancer to be perpendicular. Bind-free installation. Used for installing the harmonic balancer.
BrandProForm #ad
ManufacturerProform #ad
Height1.8 Inches
Length11.2 Inches
Weight0.55 Pounds
Width5.2 Inches
Part Number66515
Model66515

2. Sunluway

#ad

LS Harmonic Balancer Installation Tool Crankshaft Pulley Installer LS1

#ad
Sunluway #ad - Satisfaction guarantee: if you're not 100% satisfied with your grab handle covers, simply return it for a full refund in 30 days, no questions asked money back guarantee.

Using: simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. Fitment: fits all gm based ls engines. Premium support & 18 months Warranty. Advantages: this tool makes installing a harmonic balancer very easy and it will not thread into your crankshaft. High quality: made from heavy duty 109 grade steel threaded rod. Ls1 crankshaft pulley installer works with all Gen V LT series engines including LT4 RPO code.
BrandSunluway #ad
ManufacturerSunluway #ad
Part NumberLSHB

3. 3mirrors

#ad

3mirrors Upgraded Harmonic Balancer Puller 551141 Crank Install Tool Compatible with GM 1997-Up LS1 / LS Engines Crank Pulley Installer

#ad
3mirrors #ad - The nut is a custom heightened nut, which is twice the normal nut. It will be easier to twist with a wrench, and the wrench will easily fall off. Good quality and worked perfect, Much safer than pulling on the balancer with a bolt.

Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5. Upgraded bolt strength is 12. 9, and one end has a hex head smaller than the bolt diameter, which is easy to install and remove. The 2 small washers are: 16*40*5mm, 16*45*4mm, they are pretty strong. Easy job, tool threads into crankshaft and pushes the crankshaft pulley into position. Ls / lt harmonic balancer install tool. 109 steel upgraded manufacturing craft, 2 washers, the screws and the stud rod are smooth connection and not easy to get stuck, add lubricating oil will be more perfect when used! NEW Package: 1 UPGRADED threaded stud, & 1 flange nut; Upgraded Hex bolt.
Brand3mirrors #ad
Manufacturer3mirrors #ad
Weight0.78 Pounds
Part NumberT003GM03

4. ABN

#ad

ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set

#ad
ABN #ad - Contents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification.

Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, unf 5/16” x 3”, m8 x 1. 25 x 65mm, 3/4-16, 7/16-20; black screws m10 x 1. 5 x 35mm, m8 x 1. 25 x 45mm, unc 5/16” x 3-1/2”, unf 1/4" x 2-1/2”, unc 3/8” x 4-1/2”, 1/2-20, unc 3/8” x 3”, M14 x 1.5, unc 5/16” x 6”, m8 x 1.

25 x 90mm; silver screws unc 3/8” x 2”, 9/16-18, unf 3/8” x 1-1/2”, 5/8-18, M12 x 1.5, unc 3/8” x 2”. Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible.
BrandABN #ad
ManufacturerABN #ad
Height2.25 Inches
Length13 Inches
Weight8.51 Pounds
Width10 Inches
Part Number6595
Model4333088824

5. Performance Tool

#ad

Performance Tool W89710 Harmonic Balancer Installer

#ad
Performance Tool #ad - Heavy-duty forcing screw has internal threads to fit the threaded adapters, Blow molded case keeps set components organized for easy selection.

Special adapters make this a complete master harmonic balancer installer set for most car and light truck applications. Works on most european and asian vehicles including BMW, VW, Toyota, Honda, Kia and Hyundai. Services harmonic balancers as well as under drive pulleys and recessed crank threads on Dodge Hemi, GM Gen III/IV, and Ford 4. 6 and 5. 4 modular engines. Set includes the traditional installer adapters as well as long reach adapters for late model applications.
BrandPerformance Tool #ad
ManufacturerPerformance Tool #ad
Height2.7 Inches
Length8.2 Inches
Weight3 Pounds
Width4.65 Inches
Part NumberW89710
ModelW89710

6. ABN

#ad

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

#ad
ABN #ad - Protect your crankshaft from failure: the abn long reach harmonic balancer installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle; A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.

Convenient storage: heavy-duty plastic blow-molded case provides convenient organization and easy transportation; The 10 x 5. 2 x 2. 8 inch 25. 4 x 13. 2 x 7. 1 cm carrying case features lock latches for safe storage. Easy to use: attach the pressure bearing screw nut onto the chosen jack screw; After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer; Continue tightening system into place with hand wrench not included and remove installer assembly; Always wear safety gear.

Fits your vehicle: designed for use on many late ford, m12x1. 75, m12x1. 5, gm, and chrysler vehicles with V8 and V6 engines; Long reach thread sizes include M14x1. 5, dodge, M16x2.
BrandABN #ad
ManufacturerABN #ad
Height2.8 Inches
Length10 Inches
Weight1.5 Pounds
Width5.2 Inches
Part Number7429

7. OEM TOOLS

#ad

OEM TOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer | Extra-Long Forcing Screws for Hard-to-Reach Balancer Pulleys

#ad
OEM TOOLS #ad - Uses 3 puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. M16 x 2. 0 screw gM; 2. Money saver: removing and reinstalling the harmonic balancer is a relatively simple operation, and can save you hundreds of dollars doing it yourself.

M12 x 1. 5 ford. Wide application: this kit contains bolts that fit a wide variety of V8 and V6 vehicles. And four forcing screws: 1. Full specifications: pully installer nut-bearing assembly. Storage case included: Our harmonic balancer pulley removal tool comes in a durable blow-molded organizing carrying case. For hard-to-reach harmonic balancers: pulley removal tool for pressed-on harmonic balancers with a single center retainer bolt. M14 x 1. 5 dodge, and Jeep; 3. M12x 1. 75 doge chrysler, Chrysler, and Jeep; 4.
BrandOEM TOOLS #ad
ManufacturerOEMTOOLS #ad
Height2.7 Inches
Length10.2 Inches
Width5.2 Inches
Part Number27306
Model27306
WarrantyOEM Limited Lifetime

8. kauplus

#ad

Kauplus Harmonic Balancer Pulley Installer Pulley Puller & Installer Set

#ad
kauplus #ad - Come in with blow case. Idea for installs drive pulleys or harmonic balancers that are press-fitted onto the crankshaft, available on almost every car and light truck application. The heavy-duty 7/8" diameter forcing screw has internal threads to fit the threaded adapters. Threaded adapter size each of: 7/16-20, 9/16-18, m12 x 1. 5, m10 x 1. 5, m16 x 1. 5, 5/8-18, m14 x 1. 5, 3/4-16, m12 x 1. 0, m12 x 1. 75, 1/2-20, m14 x 2. 0, m16 x 2. 013 special adapters in the right reach lengths to fit most threaded crankshafts.
Brandkauplus #ad
ManufacturerKaupa #ad
Part NumberAMZ PC9199

9. ICT Billet

#ad

ICT Billet LS LT Harmonic Balancer Install Tool LS1 LT1 Pulley Installation 551141Z

#ad
ICT Billet #ad - Ls / lt harmonic Balancer Install Tool. Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. Tool threads into crankshaft and pushes the crankshaft pulley into position. Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5. Package includes: 1 grade 8. 8 threaded stud, 2 washers, & 1 flange nut.
BrandICT Billet #ad
ManufacturerICT Billet #ad
Part Number551141Z