Top 10 LS Swap Fuel Line Kit – Automotive Replacement Fuel Hoses

As an Amazon Associate I earn from qualifying purchases.

1. EVIL ENERGY

#ad

EVIL ENERGY 6AN 3/8'' PTFE EFI LS Fuel Injection line Fitting Kit Stainless Steel Braided 25FT

#ad
EVIL ENERGY #ad - A ptfe tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. Ptfe fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line. Professional installation is highly recommended.

The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Maximum working pressurepsi : 3000psi. Ptfe tube fuel line length: 25Ft, inner diameter: 03inch 8mm, outside diameter: 047inch 12mm. Please measure before purchase! 25ft 6an braided fuel injection line kit includes fuel ptfe tube and aluminum alloy fitting adapter: 6pcs 6an ptfe straight hose end, 2pcs 6AN to 1/4"NPT hose adapter fitting, 1pc 6AN to 5/16" hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN PTFE 45 Degree hose end, 1 pc AN6 to 3/8"quick disconnect male.

Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Evil energy provide this product have 3-month warranty. The 6an ptfe fuel line mostly used in efi ls system and can be worked with petrol, alcohol, E85, pump gas, diesel, oil, hydraulic fluid, coolant, fuel. The 6an ptfe hose working temperature range: -76℉ to 446℉ -60℃ to 230℃. Outer nylon braided has excellent inflaming and safer to use.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01486BK

2. IPARTS EXPERT

#ad

Black, Fuel Line Hose Kit, Nylon Stainless Steel Braided 3/8 Fuel Line 6AN 20FT Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit

#ad
IPARTS EXPERT #ad - Recommended for alcohol, hydraulic and vacouum applications. Universal application: the fuel line hose fits different brands of different cars. Professional Installer is Highly Recommended. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Exchange or return for free if leak. Package includes: 1 x 6an 20ft nylon braided hose, 2 x 90 degree swivel Hose Ends, 4 x straight swivel hose ends, 2 x 45 degree swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Hose material: covered with high quality woven nylon and stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

Safety features for your protection: fuel hose: sizeid: 6an, length: 20ft, working temperature: -100℉ to 500℉ -73°C to + 260°C, Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance. Nylon braided cpe fuel line: best for oil gas line, fuel hose, transmission, clutch, clutch hose, nitro, oiling, power steerig, turbo line.
BrandIPARTS EXPERT #ad
ManufacturerCoralov-US #ad
Part NumberCL005

3. Pilida

#ad

Pilida 3/8 Fuel Line Kit: 25FT 6AN Fuel Line Hose Kit EFI LS Fuel Injection line with 14 pcs AN6 Swivel Fuel Hose Fitting Adapter Kit, Rubber

#ad
Pilida #ad - No worry to buy: excellently sealed, no leaking. Used this on a ls swap, make it easier for the plumbing of fuel system. Fule hose inner diameter:3/8 inch, outside diameter: 5/8inch. Mostly used in ls system and can be worked with petrol, pump gas, E85, alcohol, hydraulic fluid, coolant, diesel, oil, fuel.

We offers 3-month after-sale service for the LS Conversion Fuel Line Kit. All the fittings feature a reusable spin-lock connector. Bursting pressure : 3MPA. Excellent stability: the 3/8 fuel hose made of premium quality nbr rubber; The hose end AN fittings is made of high strength Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength. Any problem you have, contact us directly by amazon message. Limited time deal: $75. 99 original price: $85. 99 fuel hose kit includes fuel tube and aluminum alloy fitting adapter: 6pcs 6an straight hose end, 2pcs 6an to 1/4"npt hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN 45 Degree hose end, 1pc 6AN to 5/16" hose adapter fitting, 1 pc AN6 to 3/8" quick disconnect male and 25Ft 6AN NBR fuel line.

Make life easy: the fuel injection hose are easily enough here to run all the way from your fuel tank to the engine. Please measure before purchase. Please noted: professional installation and Adjustable AN Wrench is highly recommended.
BrandPilida #ad
ManufacturerPilida #ad

4. EVIL ENERGY

#ad

EVIL ENERGY 6AN 3/8" Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Oil Gas CPE 20FT Black

#ad
EVIL ENERGY #ad - Black braided steel fuel hose maximum working pressure psi: 500 psi. The 6an nylon braided fuel line kit includes: 10pcs 6an swivel hose ends 4pcs straight, 2pcs 90degree, 2pcs 180degree, 2pcs 45degree, 2pcs 6an hose separator clamp and 3/8 braided fuel line Length: 20 Feet.

Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use. Please measure before purchase! Commonly used as transmission oil cooler line, fuel supply line, oil feed line, hydraulic fluid, coolant, coolant fluid hose, oil, pump gas, ls swap fuel line.

Nylon and stainless steel braided cpe fuel hose can be used with transmission fluid, vacuum, carburetor fuel hose, fuel return line, race gas, turbo cooler line, diesel and fuel. Bursting pressurepsi: 2000psi. Professional installation is highly recommended. Warranty: evil energy offers 3-month warranty for the braided fuel line. Hose id: 5/16" 8. 71mm. Hose od: 056inch 14.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Height3.54 Inches
Length8.66 Inches
Width7.87 Inches
Part NumberFBA-KT01269AN6BK-HW

5. Goodies Speed

#ad

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion, Goodies Speed 75116

#ad
Goodies Speed #ad - Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This is a popular fuel supply solution for fuel injection EFI / FI retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s. Simple fuel supply for LS swap with AN-6 adapter fittings included. This filter-regulator is commonly installed near the tank so that only a short return line is required.
BrandGoodies Speed #ad
ManufacturerGoodies Speed #ad
Height5.5 Inches
Length3.7 Inches
Width3.7 Inches
Part Number75116

6. WonVon

#ad

LS3, LS6, LS2, LSX, L76, WonVon Fuel Pressure Regulator/Filter Kit with 6AN Fittings for EFI or LS Swap for LS1, LQ9, LM7, LQ4, L99

#ad
WonVon #ad - Popular for simplifying the fuel system for lS swaps or standalone EFI systems such as Holley, FiTech, or FAST designed to operate on 58psi of static supply pressure.

Fitment: ls1, l99, lq9, lq4, ls3, lm7, ls2, l76, ls6, LSX. When mounted near the fuel tank this filter allows you to run a single fuel feed line to the engine and just a short return loop back to the tank. Part number: gf822, gg-299, 86737, 19239926, 73737, g11290, 61633737, pf5493, f55493, gg299, 33737, g8836, 3737, 10299146, 001834890 1834890, qfs-f201, gf1822, ff881dl, gf336 g3737, LS9904. This filter/regulator assembly is commonly used when adapting return style fuel systems for use with returnless applications.
BrandWonVon #ad
ManufacturerWonVon #ad
Height3.15 Inches
Length8.27 Inches
Width3.54 Inches
Part NumberWU0702-482-1541366592
ModelWU0702-482-1541366592

7. Vincos

#ad

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

#ad
Vincos #ad - Excellently sealed, 100% no leaking. Exchange or return if leak. Working pressure:500 PSI. Hose material: nylon and stainless steel braided + CPE Synthetic Rubber; The fitting is made of T6061 Aluminum, high strength and good durability. Package including: 20 ft braided fuel/oil/gas line Kit10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line. Universal application: the fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water, gas or antifreeze. Working temperature: -40 f to +248 F.
BrandVincos #ad
ManufacturerPartsSquare #ad
Height12.2 Inches
Length14.57 Inches
Width4.13 Inches
Part Number193709
Model193709

8. maXpeedingrods

#ad

MaXpeedingrods 25FT Fuel Injection Line + AN6 Fittings Ends Kit EFI FI W/Filter LS Conversion

#ad
maXpeedingrods #ad - Fitting size:-6 AN. Package include:1x 25 feet of high-pressure fuel injection hose; 1x 3/8" fuel filter feed line fitting;1x 5/16" fuel filter/regulator return line fitting; 2x 3/8" female to -6AN male straight filter fittings; 2x 1/4" NPT to -6AN male fuel pump pickup and return line adapters; 2x 45-degree -6AN female to 3/8" hose fittings; 6x Straight -6AN male to 3/8" hose fittings; 1x LS fuel filter/58psi regulator; 1x 255LpH maximum fuel pump flow rate.

Hose working pressure: 217. 5-290psi. Hose outside diameter: 6. 30inch/16mm & hose Inner Diameter: 3. 74inch/9. 5mm. The filter features a 3/8 male inlet, 5/16 male return outlet, and a 3/8 female supply outlet.
BrandmaXpeedingrods #ad
ManufacturermaXpeedingrods #ad
Part NumberBS70

9. EVIL ENERGY

#ad

EVIL ENERGY 6AN 3/8" PTFE E85 Hose Braided Fuel Injection Line Fitting Kit 16FT Nylon Stainless Steel Black

#ad
EVIL ENERGY #ad - Braided fuel hose Inner Diameter: 5/16" 8. 1mm. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Professional installation is highly recommended. The an6 nylon and stainless steel braided ptfe fuel injection line kit includes: 10pcs 6an ptfe hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN6 PTFE braided fuel line Length: 16feet.

Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Black braided ptfe fuel line can be used as fuel injection hose, transmission oil cooler line, vacuum line, carb fuel line, ls engine swap fuel line, vapor return line, turbo oil feed and boost line, EFI fuel line, fuel return line, fuel supply line and other high temperature high pressure applications.

Outside Diameter: 046in 11. 7mm. Please measure before purchase! Ptfe hose relatively hard, it can't be bend and folding in half. 3/8" an-6 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances. Maximum working pressure psi: 3000 psi. Bursting pressure psi: 10000psi.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Weight2.54 Pounds
Part NumberFBA-KT00467BB

10. Vincos

#ad

Vincos 16Ft 6 an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit Black Leak Free

#ad
Vincos #ad - Universal application: the fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water, gas or antifreeze. Features: maximized Resistance to Heat, Corrosion and Abrasion. Working pressure:500 PSI. Working temperature: -40 f to 248 f-40°c to +120°C under most operating. Package including: 16 ft black braided fuel/oil/gas Line Kit:10pcs 6AN hose fitting + 16Ft AN6 Stainless Steel Oil line. Hose material: nylon and stainless steel braided + CPE Synthetic Rubber; The fitting made of T6061 Aluminum, high strength and good durability.
BrandVincos #ad
ManufacturerPartsSquare #ad
Height10.24 Inches
Length12.6 Inches
Weight2.63 Pounds
Width3.94 Inches
Part Number191334