As an Amazon Associate I earn from qualifying purchases.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials; Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts. Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
Fel-Pro #ad - High-density fiber facing material attached to both sides of a perforated steel core. Application-specific design ensures a perfect fit. Engineered and manufactured to meet or exceed manufacturer specifications.
Fel-Pro #ad - Meets or exceeds all original equipment specifications. Engineered for the sealing repair environment. Application specific design to ensure a perfect fit. Unsurpassed quality you can trust. Validated for fit, form, and function.
BLACKHORSE-RACING #ad - Compatible with: 1964-1970 ford mustang 260/ 289/ 302except 1965 Ford Mustang, 1968 Ford Mustang Base. 1. 5" primary tube, 2. 5" collector. Package including: 1 x set of header exhaust System, Gaskets and Bolts as shown in the Picture above ALL if any is necessary for Installation.
Speedmaster #ad - Also, and feature an embossed ridge around the exhaust port for a tight, while keeping the header bolts tight. The copper gaskets help even out the flow between the head and header flange to minimize warping.
1. Remflex
#adSet of 2, Remflex 3003 Exhaust Gasket for Ford V8 Engine
#adRemflex #ad - Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials; Remflex exhaust gaskets fill those gaps permanently.
More information #ad
1-1/8 inch width x 1-1/2" height stock square port; ford v8 - 302 '81-'95, 351 '69-'97 Windsor, manifold or headers, 1-1/8" x 1-1/2" Square Port, 2/Set. There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts. Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
| Brand | Remflex #ad |
| Manufacturer | Remflex #ad |
| Height | 0.55 Inches |
| Length | 22.1 Inches |
| Weight | 0.25 Pounds |
| Width | 19.25 Inches |
| Part Number | 3003 |
| Model | 3003 |
More information #ad
2. Fel-Pro
#adFel-Pro 1415 Exhaust Manifold Gasket Set
#adMore information #ad
Resists blowout and burnout from high-temperature exhaust and far stronger than basic paper gaskets. Validated for fit, form and function.| Brand | Fel-Pro #ad |
| Manufacturer | FEL-PRO #ad |
| Height | 7.87 Inches |
| Length | 5.91 Inches |
| Weight | 0.2 Pounds |
| Width | 1.97 Inches |
| Part Number | 1415 |
| Model | 1415 |
| Warranty | Manufacturer Warranty |
More information #ad
3. BBK
#adPair, BBK 1575 1-5/8" Premium Exhaust Header Gaskets Kit for Ford 302/351
#adBBK #ad - Sold as a Pair. Premium graphite material Ensures Leak Free Seal Every Time. Designed for Higher Temperature Performance Applications. Port matched for optimum Flow of All 1-5/8 Exhaust Headers. Bbk is your number one aftermarket Performance Brand in the USA - American Designed and Built.More information #ad
| Brand | BBK #ad |
| Manufacturer | BBK Performance Parts #ad |
| Height | 23 Inches |
| Length | 1 Inches |
| Weight | 0.25 Pounds |
| Width | 8 Inches |
| Part Number | 1575 |
| Model | 1575 |
| Warranty | One year from the date of purchase |
More information #ad
4. Flowtech
#adFlowtech 99253RFLT Header Gasket, Round Port, Small Block Ford
#adFlowtech #ad - Re-useable. Suitable For Port-Matching. Will not burn Or Blow Out. Water/Weather Resistant. Multi-layer "dead Soft" aluminum conforms to create a leak-proof seal.More information #ad
| Brand | Flowtech #ad |
| Manufacturer | Flowtech #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.4 Pounds |
| Width | 0 Inches |
| Part Number | 99253RFLT |
| Model | 99253RFLT |
| Warranty | 90 Days |
More information #ad
5. Flowtech
#adFlowtech 99263FLT Header Gasket, Ford 302-351W
#adFlowtech #ad - The inorganic filler system provides strong bolt torque retention properties. Engineered for a precise, easy fit. Mechanically clinched to a perforated metal core for superior sealing and strength. Manufactured of P73 Ferroglass non-asbestos facing material for long life.More information #ad
| Brand | Flowtech #ad |
| Manufacturer | Flowtech #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 99263FLT |
| Model | 99263FLT |
| Warranty | 90 Days |
More information #ad
6. Fel-Pro
#adFel-Pro MS90000 Exhaust Manifold Gasket Set
#adMore information #ad
| Brand | Fel-Pro #ad |
| Manufacturer | FEL-PRO #ad |
| Height | 0.8 Inches |
| Length | 20.9 Inches |
| Weight | 0.25 Pounds |
| Width | 3.6 Inches |
| Part Number | MS90000 |
| Model | MS90000 |
| Warranty | Contact retailer/seller for assistance |
More information #ad
7. BLACKHORSE-RACING
#adBLACKHORSE-RACING Tri-Y Stainless Steel Exhaust Headers Manifold Pipe Set with Gasket Compatible with 1964-1970 Ford Mustang 260 289 302 351W
#adMore information #ad
Increase high flow air, instantly Gain 10 -15 Hp. Made of high quality T304 Stainless Steel Material. Tq.| Brand | BLACKHORSE-RACING #ad |
| Manufacturer | blackhorseracing #ad |
| Weight | 19.4 Pounds |
| Part Number | HM0124 |
More information #ad
8. Spectre
#adSpectre Performance 46723 7/8" Header Bolt
#adSpectre #ad - Quantity 12 per package. Fits all general Motors, Ford and most Chryslers. 3/8 in. 16 x 7/8 in. Grade 5, gold iridite hex head with tool. Gold iridite.More information #ad
| Brand | Spectre #ad |
| Manufacturer | Spectre #ad |
| Height | 0.2 Inches |
| Length | 0.5 Inches |
| Weight | 0.5 Pounds |
| Width | 0.4 Inches |
| Part Number | 46723 |
| Model | SPE-46723 |
| Warranty | 3 Months |
More information #ad
9. Speedmaster
#adSpeedmaster PCE355.1002 Copper Exhaust Header Gasket Set
#adMore information #ad
Square port these procomp electronics exhaust gaskets are made from thick copper, they'll conform to rough or irregular surfaces to maintain a positive seal, leakproof seal. Ford 289, 302, 351 Windsor.| Brand | Speedmaster #ad |
| Manufacturer | Speedmaster #ad |
| Height | 0.6 Inches |
| Length | 9.8 Inches |
| Weight | 1 Pounds |
| Width | 20.3 Inches |
| Part Number | PCE355.1002 |
More information #ad
10. Speedway Motors
#adFits Ford Small Block, Speedway Motors Copper Exhaust Gaskets
#adSpeedway Motors #ad - 1-3/8" tall x 1-1/8" wide. Constructed of the finest. 041 copper material and will seal where most gaskets fail. Gaskets are die cut and dead soft. Overall length 16-3/8", overall height 2-1/8", thickness. 095". Embossed port ridge for a perfect seal.More information #ad
| Brand | Speedway Motors #ad |
| Manufacturer | Speedway Motors #ad |
| Height | 1 Inches |
| Length | 20 Inches |
| Weight | 1 Pounds |
| Width | 3 Inches |
| Part Number | 91013730 |
More information #ad
