As an Amazon Associate I earn from qualifying purchases.
DASBET #ad - Made of premium high strength steel, this fan clutch wrench set is built to last a lifetime. Function: the 32mm & 36mm fan clutch wrench removes lock nuts on temperature-dependent thermo-viscous fans, one wrench with two size make the work easier.
Package included: 1 x 32mm and 36mm fan clutch removal tool. Fit your cars: be compatible with bmw engine models m10, s14, m44, m73, s38, m52, m56, s50b32, m52tu, m20, m50, S50B30, m60, S54; Also compatible with some Ford, m30, m54, GM, m40, m70, and Chevy models.
TEXALAN #ad - Durability: made of 02 inch 5 mm thick vanadium steel, it has maximum strength and service life. Suitable for your vehicle: compatible with engine models m10, m50, s38, m20, m56, m60, s50b30, m54, m30, m70, m44, m52tu, m52, s50b32, m40, s54; the bar has 3 holes of 0.
5inch 13mm in diameter and 1 hole of 094 x 047inch24x12mm, s14, m73, 1PC 1.3 x 043inch33x11mm and 1PC 1. 5 x 098inch38x25mm semi-circular groove. 12. 5 inches 31. 8 cm long clutch fan removal tool handle can reduce user fatigue.
Easy to use: attach the pulley holder bar with your bolts inserted through the holes, and loosen the fan clutch nut by turning clockwise using 1. 26inch 32mm or 1. 42inch 36mm both included spanner to undo nut; if the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, place wrench on fan clutch nut, lock into place on water pump face, remove bolts and reinstall over bar. Set include: 1pc 1.
SMOTIVEPRO #ad - No need for any other special pinning tools. Convenient design: conventional wrenches are just too wide for the job of removing the fan clutch assembly on some engines. Here's the solution. You can hold this convenient design fan clutch stationary with the help of fan clutch tool and then turn the fan clutch nut with this special wrench.
Use your skills: just slip the clutch fan tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose.
Efficient : this fan clutch removal tool is much better and efficient than using manual wrenches and does the work a lot faster. It can be used to fix, install, disassemble, screw and unscrew any accessories or and quickly removes and installs fan clutch. Makes knocking off or installing a fan clutch a breeze. Specifications: fan clutch wrench 7/8", 47 mm, 36 mm, 32 mm, 40 mm, 1-7/8""and 2 inch.
Dokili #ad - Package includes - 1 pc 36mm x 32mm Wrench, 1 Pc Fan Clutch Holder. Fitment - fan clutch holder fits for bmw engine models : m10, m73, m54, m30, m44, m50, s14, s38, m40, M52TU, m60, m20, s50b32, s50b30, m52, M56, m70, S54.
Easy to use - the 1'3" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily.
The wrench is covered with rubber process, more comfortable and non-slip in hand. Features - this 2 piece tool set includes an extra-long 32mm wrench and purpose built holding tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines, E39, E36, E90, E46, compatible with most BMW E-series sedans including the E34, and more.
ATPEAM #ad - Wide application: the fan clutch removal tool kit is compatible with bmw engine models m10, m56, s54, s14, m30, s50b32, M60, M54, m44, also compatible with some Ford, S50B30, m73, m20, M50, m52, M70, M40, gm, S38, M52TU, and Chevy models.
Package included: 1 x 32mm and 36mm fan clutch removal tool, one wrench with two size 32mm & 36mm. Easy to use: place the wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut.
Durable material: this 32mm & 36mm fan clutch removal tool is constructed from premium high strength steel, which has strong hardness and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands.
YHB #ad - Packing include: x1pc 32mm fan clutch wrench, x1pc 36mm fan clutch wrench, x1pc double-ended water pump fan pulley holder. This fan clutch tool removal kit Designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
GearWrench #ad - Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing. Gearwrench's fan clutch Service Set covers most vehicles with bolt on pulleys.
ZKTOOL #ad - Quality: this 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. Application: 32mm&36mm wrench tool is compatible with bmw m4 m10 m20 m30 m40 m44 m50 m52 m52tu m54 m56 m60 m70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford.
If you have any questions, please contact us. We provide all the necessary information for each product. Service: zktool has the most perfect warranty service.
This is a two-piece multifunctional tool that you will like. Brand new upgrade tool: 32mm & 36mm fan clutch nut wrench tool is more practical than similar tools on the market. We will wait 24 hours. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money. And its price is more affordable and better quality.
1. DASBET
#adDASBET 32mm & 36mm Fan Clutch Nut Wrench Compatible for BMW
#adPackage included: 1 x 32mm and 36mm fan clutch removal tool. Fit your cars: be compatible with bmw engine models m10, s14, m44, m73, s38, m52, m56, s50b32, m52tu, m20, m50, S50B30, m60, S54; Also compatible with some Ford, m30, m54, GM, m40, m70, and Chevy models.
More information #ad
Easy to use: place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut.| Brand | DASBET #ad |
| Manufacturer | DASBET #ad |
| Height | 1 Inches |
| Length | 15 Inches |
| Width | 2 Inches |
| Part Number | DT-05-1101 |
More information #ad
2. TEXALAN
#adTEXALAN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set
#ad5inch 13mm in diameter and 1 hole of 094 x 047inch24x12mm, s14, m73, 1PC 1.3 x 043inch33x11mm and 1PC 1. 5 x 098inch38x25mm semi-circular groove. 12. 5 inches 31. 8 cm long clutch fan removal tool handle can reduce user fatigue.
More information #ad
Application: the 1. 26-inch 32 mm and 1. 42-inch 36 mm fan clutch wrench kits with fan pulley fixing tool remove the lock nut of the thermally viscous fan that changes with temperature, the fixing rod fixes the water pump pulley in place and loosens the radiator fan at the same time. Easy to use: attach the pulley holder bar with your bolts inserted through the holes, and loosen the fan clutch nut by turning clockwise using 1. 26inch 32mm or 1. 42inch 36mm both included spanner to undo nut; if the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, place wrench on fan clutch nut, lock into place on water pump face, remove bolts and reinstall over bar. Set include: 1pc 1.
| Brand | TEXALAN #ad |
| Manufacturer | TEXALAN #ad |
| Part Number | BNT-FCHX-3PC |
More information #ad
3. SMOTIVEPRO
#adQuickly Removes & Installs Fan Clutch, Auto Repair Spanner Kit, SMOTIVEPRO Pneumatic 8Pcs Fan Clutch Wrench Set
#adUse your skills: just slip the clutch fan tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose.
More information #ad
Easy to operate: better tools mean easier, more efficient work, with this pneumatic fan clutch wrench set and Spanner wrench, repair will become much easier, adjust the arms to a suitable distance through the screw, then insert pins into the corresponding slots. Efficient : this fan clutch removal tool is much better and efficient than using manual wrenches and does the work a lot faster. It can be used to fix, install, disassemble, screw and unscrew any accessories or and quickly removes and installs fan clutch. Makes knocking off or installing a fan clutch a breeze. Specifications: fan clutch wrench 7/8", 47 mm, 36 mm, 32 mm, 40 mm, 1-7/8""and 2 inch.
| Brand | SMOTIVEPRO #ad |
| Manufacturer | SUNBRIGHT TOOLS CO.,LTD #ad |
| Part Number | WR60 |
| Model | WR60 |
More information #ad
4. Dokili
#adWater Pump Holder Removal Tool Fits for BMW, Dokili 36mm x 32mm Fan Clutch Nut Wrench, 2 Pieces Fan Clutch Wrench Set
#adEasy to use - the 1'3" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily.
More information #ad
Top quality material - adopted almost the toughest tool steel material on the market, tear, each one is further galvanized to resist wear, which is different from the wrenches on the market in feel, and corrosion under even punishing use. The wrench is covered with rubber process, more comfortable and non-slip in hand. Features - this 2 piece tool set includes an extra-long 32mm wrench and purpose built holding tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines, E39, E36, E90, E46, compatible with most BMW E-series sedans including the E34, and more.
| Brand | Dokili #ad |
| Manufacturer | Dokili #ad |
| Part Number | 1 |
More information #ad
5. ATPEAM
#adATPEAM 32mm & 36mm Fan Clutch Nut Wrench | Water Pump Fan Clutch Automotive Fan Clutch Removal Tool Compatible for BMW 32mm Wrench 36mm Wrench
#adPackage included: 1 x 32mm and 36mm fan clutch removal tool, one wrench with two size 32mm & 36mm. Easy to use: place the wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut.
More information #ad
Automotive fan clutches: the atpeam 32mm & 36mm fan clutch wrench removes lock nuts on temperature-dependent thermo-viscous fans, one wrench with two size make the work easier. Durable material: this 32mm & 36mm fan clutch removal tool is constructed from premium high strength steel, which has strong hardness and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands.
| Brand | ATPEAM #ad |
| Manufacturer | ATPEAM #ad |
| Height | 7 Inches |
| Length | 11 Inches |
| Width | 3 Inches |
| Part Number | AE-18-48 |
More information #ad
6. YHB
#adFan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit, YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit 3pcs
#adMore information #ad
Fit: fan clutch removal tool 36mm and 32mm fan clutch tool kit for bmw m10, m54, m52, s54. Also fit some ford, m40, m44, m52tu, m20, m50, m60, m70, s50b32, m73, s38, m56, s50b30, s14, gm, M30, and Chevy models. Wrench thick:6mm/023”, wrench long:37. 5mm/14. 8”. Holder thick:5mm/02”, holder long:38mm/15”. Material: steel.| Brand | YHB #ad |
| Manufacturer | YHB #ad |
| Part Number | YHBOT00404 |
More information #ad
7. GearWrench
#ad41580D, GEARWRENCH Fan Clutch Service Set |Fan Nut Wrenches|Pully Holder|Blow Mold Case|
#adMore information #ad
Features the patented universal PULLEY holder. Fan nut wrenches included: 22mm, 36mm, 50mm, 40mm, & diesel. Durable blow mold case for tool retention.| Brand | GearWrench #ad |
| Manufacturer | GEARWRENCH #ad |
| Height | 3.9 Inches |
| Length | 23.1 Inches |
| Weight | 2.89 Pounds |
| Width | 9.1 Inches |
| Part Number | 41580D |
| Model | 41580D |
| Warranty | Standard Limited Lifetime |
More information #ad
8. ZKTOOL
#adChevrolet,Nut Water Hub Removal, Removing Holding Holder Clutch Tool,Water Pump Holder Removal Tool., ZKTOOL 32mm&36mm Fan Clutch Wrench Set Fit for BMW Ford GM
#adIf you have any questions, please contact us. We provide all the necessary information for each product. Service: zktool has the most perfect warranty service.
More information #ad
The rubber handle covered in the middle helps prevent hand fatigue during prolonged use. More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with most models of BMW, compatible with a wider range of models than similar products, Ford and Mercedes-Benz. This is a two-piece multifunctional tool that you will like. Brand new upgrade tool: 32mm & 36mm fan clutch nut wrench tool is more practical than similar tools on the market. We will wait 24 hours. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money. And its price is more affordable and better quality.
| Brand | ZKTOOL #ad |
| Manufacturer | ZKTOOL #ad |
| Height | 1.1 Inches |
| Length | 14.96 Inches |
| Weight | 1.87 Pounds |
| Width | 2.56 Inches |
| Part Number | ZK056 |
More information #ad
9. Lisle
#adLisle 43390 36mm Wrench
#adLisle #ad - Faster and easier than conventional fan clutch wrenches; no holding wrench is necessary. Replacement part for Lisle tool- 43300 . Quickly removes and installs fan clutch when repairing the water pump or fan clutch. For more information check the main Lisle tool- 43300 .More information #ad
| Brand | Lisle #ad |
| Manufacturer | Lisle #ad |
| Height | 1 Inches |
| Length | 4.25 Inches |
| Weight | 0.6 Pounds |
| Width | 1.88 Inches |
| Part Number | 43390 |
| Model | 43390 |
| Warranty | Lifetime warranty does not cover abuse |
More information #ad
10. Autocraft
#adAutocraft Fan Clutch Wrench Set
#adAutocraft #ad - 1990 to current 4. 0 liter engines. Wrench sizes: 36mm and 57mm. Each tool includes 1/2" square drive hole for use with breaker bar for more torque. Fan clutch wrench seteasy access to fan clutch nut on 1984 to 1993, 4.More information #ad
9 liter e and f series truck engines. 1984 to 1987, 4. 6 liter modular engines. Check service manual for torque specifications and thread direction. 1988 to current 2. 9 liter to 3. 0 liter engines. 2. 8 liter engines.| Brand | Autocraft #ad |
| Manufacturer | Autocraft #ad |
More information #ad
