Top 10 ARE Truck Cap Parts – Automotive Body Parts

As an Amazon Associate I earn from qualifying purchases.

1. ARE

#ad

T-Handle for ARE Pickup Truck Camper Shell Door with 2 Keys and 2 Screws

#ad
ARE #ad - Fits on most v, cx, mx, tw, and overland series are brand camper shells With One T-Handle on Rear Door. Holes are spaced 1. 5" from center of screw hole to center or other screw hole. For tops with double t-handle Rear Doors, see our ARE Double T-Handle listing. Designed to work with aRE Factory Locking Rods with Square Hole not included. May fit other Makes and Models. Easy to replace! durable high strength Nylon! In Stock! Original replacement parts, designed to work specifically with ARE Brand Toppers. For are brand camper shells rear Door. Turns Clockwise.
BrandARE #ad
ManufacturerTruck Upfitters #ad
Height4 Inches
Length6 Inches
Width1 Inches
Part NumberJU5VSBU
ModelJU5VSBU

2. Vepagoo

#ad

Pack of 2PCS., C16-09209 16 inch 38Lbs/169N Gas Shocks Struts for Leer ARE ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy

#ad
Vepagoo #ad - Welcome to click "ask seller" Besides Your Order for In-time Assistance! 15. 71 inch 38lbs/169n window struts--compressed length center-to-center: 9.

4in 239mm, extended Length Center-to-Center: 15. 7in 399mm, force: 38 lbs 169 N Per Strut. 15. 71 inch 38lbs/169n window struts--vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on. 15. 71 inch 38lbs/169n shocks struts--a new package will be offered if any quality defects occur. 15. 71 inch 38lbs/169n window struts-interchange Part Number C16-09209. Easy to install, no special tools required. 15. 71 inch 38lbs/169n window struts--End Fiting: 10mm Ball Stud Sockets.
BrandVepagoo #ad
ManufacturerVepagoo #ad
Part NumberSH0100259A:ST
Warranty12+1 Month Replacement Warranty

3. Era

#ad

ARE Truck Upfitters Replacement Palm Handle for LSII and LSX Tonneau Lid X Series and Z Series Camper Shell Bed Cover with Screw Decal. Molded Plastic Version Only.

#ad
Era #ad - Works with are brand lsii and lsx tonneau Covers, and X Series or Z Series Camper Shell Models. Works with tonneaus with newer PLASTIC Handle Only Not Metal Handles. Easy to replace! comes with all Parts You See in Pictures.
BrandEra #ad
ManufacturerARE #ad
Height1.75 Inches
Length4 Inches
Width0.5 Inches
Part NumberARE1
ModelARE Handle Plastic

4. ESI

#ad

ESI Ultimate Tailgate Seal with Taper Seal 10ft for use with Truck Caps and Tonneau Covers

#ad
ESI #ad - The original and patented tailgate seal keeps out dust and water that enters in through the tailgate gap and sidewalls, when using a truck bed cap or tonneau cover. Reduces tailgate vibration. Packaged directions and online instructions must be followed to properly install this product.

Apply when the air and surface temperature is between 55° - 104°F 13° - 40°C. Made in usa. Adheres to all surface finishes including spray on bed liners. 10ft of automotive grade, EPDM rubber with 3M ST1200 tape. Not compatible with the following pickup trucks: 2019 chevy silverado and gmc sierra 1500 with new body style, 2020 chevy silverado and gmc sierra 2500 and 3500 with new body style, GMC Sierra with MultiPro Tailgate purchase ASIN: B085896S8R, ranger 2019 body style purchase asin: b07yf5bl8m, 2021 chevy colorado and gmc canyon, RAM with RamBox purchase ASIN: B08KTKY5S9 and RAM with Multifunction Tailgate purchase ASIN: B08NTZYDN9.3

30 minute installation or save time installing and get a complete seal by viewing detailed photo instructions for most tailgate configurations, go to TailgateSeal. Com.
BrandESI #ad
ManufacturerExtruded Solutions #ad
Height1.05 Inches
Length120 Inches
Weight0.38 Pounds
Width0.5 Inches
Part NumberUTGS10
ModelUTGS10
WarrantyWARRANTY: Extruded Solutions, Inc. (ESI) warrants all products to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. This warranty does not include damage to products resulting from accident, misuse, improper installation or storage, and unauthorized alterations. ESI’s warranty obligation shall be limited to furnishing substitute products for original products, which in ESI’s sole judgment, have proven defective in material or workmanship within the ninety (90) days warranty period.

5. Y-autopart

#ad

Mounting Clamps Truck Caps Camper Shell for Chevy Silverado Sierra 1500 2500 3500,Dodge Dakota Ram 1500 2500 3500,F150 F250,Titan,Tundra 4 PCS

#ad
Y-autopart #ad - Material:made of aluminum, high quality and strength, hard to be corroded. Package:set of 4 black clamps. Fitment:chevy:silverado/sierra 1500, 2500, 2500, 3500. Silverado/sierra 07 with cargo rail. Function:designed to mount truck caps on many pick-up truck models. Dodge:Dakota. Ram 1500, 3500 F150 f250 Mitsubishi:Raider. Titan. Tundra. Benefits:stay tight all the time. Fit firmly to your truck and cap/lid. No drilling required.
BrandY-autopart #ad
ManufacturerY-autopart #ad
Height1.2 Inches
Length3.9 Inches
Width3.1 Inches
Part NumberTLC-4
ModelTLC-4

6. G-PLUS

#ad

Truck Cap topper Compatible for Leer Century ARE Recessed LED third 3rd brake light Red Lens AT-LED-36R-02R

#ad
G-PLUS #ad - This low profile led wedge design is used by Leer, Astro, Jason, and A. R. E. Bottom tape mounting assures that the lamp "stays put". Slim lamp allowing creative design locations utilizing minimal cap space. High impact plastic polycarbonate lens assembly locks out moisture and resists discoloration. Contains 6 LED's.
BrandG-PLUS #ad
ManufacturerGplusmotor #ad
Height2.56 Inches
Length13.19 Inches
Weight0.4 Pounds
Width3.94 Inches
Part Number02HLA0004ARD
Warranty1 year warranty

7. Gordon Glass Co.

#ad

Truck Cap Locking T-Handle, Clockwise

#ad
Gordon Glass Co. #ad - Mounting: blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8". Package: one t-handle and two keys. Black powder coated finish. Clockwise T-Handle. Rotation: 90cw ; shaft 1-7/8 inches long.
BrandGordon Glass Co. #ad
ManufacturerGordon Glass Co. #ad
Part Number398695

8. ESI

#ad

ESI Ultra Cap Seal 1 1/2" Width x 5/8" Height 20' Length, EPDM Rubber for Caps over 200 lbs

#ad
ESI #ad - 20ft seal for mounting truck caps and camper shells that weigh over 200 lbs. Fills all bed rail gaps. Excellent compression set resistance for maximum service life and vibration absorption. For 8ft beds purchase ASIN: B00MPMBIZW. Preferred by professional installers over PVC/foam seals. No need to replace this seal every time your cap is removed. Complete kit includes seal, butyl tape, alcohol pads and detailed instructions. High quality, long-lasting automotive grade EPDM rubber.
BrandESI #ad
ManufacturerExtruded Solutions #ad
Height0.62 Inches
Length240 Inches
Weight1.12 Pounds
Width1.5 Inches
Part NumberUCS-20R
ModelUCS-20R
WarrantyWARRANTY: Extruded Solutions, Inc. (ESI) warrants all products to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. This warranty does not include damage to products resulting from accident, misuse, improper installation or storage, and unauthorized alterations. ESI’s warranty obligation shall be limited to furnishing substitute products for original products, which in ESI’s sole judgment, have proven defective in material or workmanship within the ninety (90) days warranty period.

9. Truck Upfitters

#ad

2 Truck Upfitters 12" Gas Props 12.2" extended, 8.6" compressed, 24 lbs of press ea for ARE ATC Snugtop Leer Camper Top Side/Windoors. MEASUREMENT REQ'D! Incl 4 ball mounts!

#ad
Truck Upfitters #ad - Come with four 10mm ball mounts for alternate 'other than camper shell' applications. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.

Prime! free shipping! In Stock! These do not fit all camper shell brands and models. 12. 2" extended length and 8. 6" compressed length. Equivalent to suspa #c16-03795 or Stabilus #1906. Most commonly used for camper shell side windows windoors. These do not fit all tops and toolboxes! the measurements are from center of ball mount to center of ball mount, not from end to end of strut! see picture! Truck upfitters pair 2 total of 24 pound each gas struts. Check your lengths and pressure before ordering.
BrandTruck Upfitters #ad
ManufacturerTruck Upfitters #ad
Height2 Inches
Length12.5 Inches
Weight0.69 Pounds
Width0.5 Inches
Part Number122086-24-10

10. Speedmotor

#ad

Truck Cap Topper Leer ARE CENTURY Clear Lens LED 3rd Third Brake Light lamp AT-LED-36R-01R

#ad
Speedmotor #ad - Contains 6 LED's. Super bright leds extend lamp life and reduce heat, while meeting S. A. E. Bottom tape mounting assures that the lamp "stays put". Ratings. Clear replacement Third Brake Light. 10" recess mount for leer, ARE, Jason and Astro.
BrandSpeedmotor #ad
ManufacturerSpeedmotor #ad
Height2.56 Inches
Length13.19 Inches
Weight0.42 Pounds
Width3.94 Inches
Part Number02HLA0004AWT
Warranty1 year warranty