As an Amazon Associate I earn from qualifying purchases.
MOSTPLUS #ad - Note : it will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe. Please check your car information before purchase. Material: high qualified stainless steel material, durable and anti-corrosive.
AUTOSAVER88 #ad - We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust.
Dimension: standard 4" x 8" x 15"inlet, outlet and overall length; ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly. Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Upower #ad - Wide application to ensure proper fit make sure your exhaust Tail Tip INLET diameter is 4 Inch. Note: if you think bolt on only will not tight enough, additional welding will be a nice safeguard.
Materials made of high quality Stainless steel has very strong anti-corrosive, Never Rusty. Small hole on the bottom of the exhaust Tip Could Facilitate the Drainage of Accumulated Water and Prolong the Service Life of the Exhaust Tip.
MONOKING #ad - Monoking 4 inch exhaust tip enjoy 1 YEAR warranty plus lifetime tech support and customer service. 4" inlet diameter, 8" outlet diameter, 15" overall length. Powerful sound - 4 to 8 inch exhaust tip improved powerful sound and distinctive style. Package content - package comes with 1x exhaust tip 4 inch inlet.
Made your car will seem skin to a sports car or at least a car with a modified engine. If your tailpipe has a 4'' OUTER diameter it will fit perfectly. No welding or drilling is needed, additional welding will be a nice safeguard.
Durable material - 4 to 8 inch exhaust tip made from sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting. Bolt on install - holds up long time! direct bolt-on, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench. If you think it isn’t tight enough, it takes only 2 minutes easy to install.
COLT EXHAUST #ad - Fits 4" od exhaust systems. 4" inlet 8" outlet 15" Long. Stainless steel with high resistance to rust. Bolt-On.
RP Remarkable Power #ad - Material: made by high quality stainless steel, heat-resisting, light weight, polish stainless surface, anti-corrosion and decorate appearance.
Important note: installation instruction is not included, professional help in installation may be needed. Installation style: clamp on design, Single Layer, angled cut 20 degree, Rolled Edge.
SPEC-D TUNING #ad - All of our items are 100% in original packaging! you will never receive a used item from us! items are exactly the same as shown in the images! you Will Receive the Exact Item You Purchased! Installation made easy on All of Our Items! Little to No Modifications needed at Best! 30 days refund & 90 days defective item replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You! Fitment: fit for most domestic and import vehicle with 4" exhaust system.
LCGP #ad - However, Welding Is Recommend. 4" inlet & 8 outlet universal Diesel Truck Exhaust Tip. Have a small hole on bottom of tip to drain water. Surface finished: black powder Coated.
YITAMOTOR #ad - Simple installation: bolt-on design, just fasten the bolt with M8 Allen Key to securely fix it onto the end of the exhaust tube. 1-year warranty: offers a 1-year warranty and excellent customer service, please send email any time if you have any questions Note: Professional installation would be highly recommended.
Dimension: 4 inch inside diameter inlet, 15 inch overall length; universal for all 4" outlet outside diameter exhaust tailpipes, 8 inch outside diameter outlet, but NOT for 4" inside diameter tailpipes.
Notice: the outlet outside diameter of your exhaust tubing should be equal to the inlet inside diameter of the exhaust tip 4. 0 inch. Superior construction: made of stainless steel, durability & corrosion resistance.
A-KARCK #ad - 4" id exhaust tip: 4" inlet diameter 8" outlet diameter 15" overall length, universal fits 4" outer diameter tailpipe. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust.
Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation.
1. MOSTPLUS
#adMOSTPLUS 4 inch Inlet Exhaust Tip, 4" Inlet; 8" Outlet; 15" Length Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip
#adMore information #ad
It will protect your original pipe from the sun and rain, avoid rusting and deformation. Installation - no weld and drill needed. Just fix the screw to the appropriate location of tailpipe by wrench. Fitment: inside diameter inlet-4 Inch, Outside diameter outlet-8 Inch, Overall length-15 Inch.| Brand | MOSTPLUS #ad |
| Manufacturer | MOSTPLUS #ad |
| Part Number | M31006 |
More information #ad
2. AUTOSAVER88
#adPolished, Bolt-On, Rolled Angle Cut, AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4" Inlet 8" Outlet 15" Overall Length Chrome-Plated Finish Stainless Steel Exhaust Tail Tip for 4" Outside Diameter Tailpipe
#adDimension: standard 4" x 8" x 15"inlet, outlet and overall length; ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.
More information #ad
0" before purchase. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, oil, white ash, cement, putty, sand ash regularly to keep the surface clean. Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly. Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
| Brand | AUTOSAVER88 #ad |
| Manufacturer | AUTOSAVER88 #ad |
| Height | 8 Inches |
| Length | 15 Inches |
| Weight | 1.93 Pounds |
| Width | 4 Inches |
| Part Number | J003 |
| Model | 5841844473 |
| Warranty | 1 Year Warranty |
More information #ad
3. Upower
#adUpower 4 inch Inlet 8 inch Outlet Exhaust Tip Stainless Steel 4" to 8" Tail Pipe Tips 15" Long Bolt-On 45 Degree Angle Cut Universal for Car Truck
#adMaterials made of high quality Stainless steel has very strong anti-corrosive, Never Rusty. Small hole on the bottom of the exhaust Tip Could Facilitate the Drainage of Accumulated Water and Prolong the Service Life of the Exhaust Tip.
More information #ad
Easy installation pack of 1; professional installation is highly recommended; No instruction included. Dimensionid: 4" od: 8" length: 15" Angled Roll Bolt on Exhaust Tip. Design bolt-on installation and angled cut-rolled edge design diesel Exhaust Tip.| Brand | Upower #ad |
| Manufacturer | PartsSquare #ad |
| Part Number | 165711 |
More information #ad
4. MONOKING
#adMONOKING Diesel Exhaust Tip 4 Inlet Stainless Steel Bolt On Black Tailpipes Tips 4" Inlet 8" Outlet 15" Long, 4 to 8 inch Exhaust Tip
#adMade your car will seem skin to a sports car or at least a car with a modified engine. If your tailpipe has a 4'' OUTER diameter it will fit perfectly. No welding or drilling is needed, additional welding will be a nice safeguard.
More information #ad
Not fit 4'' inner diameter pipe. And arrive within 2-3 days. Ship from U. S. 20 degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Exhaust tip 4 inch inlet - universal fits 4'' outer diameter tailpipe. Durable material - 4 to 8 inch exhaust tip made from sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting. Bolt on install - holds up long time! direct bolt-on, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench. If you think it isn’t tight enough, it takes only 2 minutes easy to install.
| Brand | MONOKING #ad |
| Manufacturer | MONOKING #ad |
| Part Number | 4 to 8 inch Exhaust Tip |
| Model | 4 to 8 inch Exhaust Tip |
| Warranty | MONOKING 4 inch Exhaust Tip offers 1 year warranty & lifetime tech support and is confident in the quality and durability of the products |
More information #ad
5. COLT EXHAUST
#adExhaust Stainless Steel Bolt On tip 4" Inlet 8" Outlet 15" Long
#adMore information #ad
| Brand | COLT EXHAUST #ad |
| Manufacturer | Colt Exhaust #ad |
| Part Number | 4 |
More information #ad
6. RP Remarkable Power
#adRP Remarkable Power, 4" Inlet 8" Outlet 18" Long Exhaust Tip, Bolt On Design Truck Tail Tip,Polished, Rolled Angle Cut Design
#adImportant note: installation instruction is not included, professional help in installation may be needed. Installation style: clamp on design, Single Layer, angled cut 20 degree, Rolled Edge.
More information #ad
Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Size: 4 inch inlet, 8 inch outlet, 18inch overall lehgth, 100% Brand New Exhaust Tip. Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution.| Brand | RP Remarkable Power #ad |
| Manufacturer | MotorDexon #ad |
| Part Number | RP_EXT28_G1 |
More information #ad
7. SPEC-D TUNING
#adSpec-D Tuning 4"Inlet/8" Outlet Black Stainless Steel Truck Bolt-On Exhaust Muffler Tip
#adMore information #ad
| Brand | SPEC-D TUNING #ad |
| Manufacturer | Spec-D Tuning #ad |
| Height | 17 Inches |
| Length | 9 Inches |
| Weight | 5 Pounds |
| Width | 8 Inches |
| Part Number | MF-TP0408D-BS-TD |
| Model | MF-TP0408D-BS-TD |
More information #ad
8. LCGP
#adBolt-On, 8" Outlet 15" Length Truck Tailtip, LCGP Diesel Exhaust Tip 4" Inlet, Black Powder Coated, Rolled End Angle Cut Tailpipe
#adMore information #ad
High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting. Style: angled Cut - Rolled Edge. Easy slip on 4" tailpipe.| Brand | LCGP #ad |
| Manufacturer | LCGP #ad |
| Height | 8.3 Inches |
| Length | 15.5 Inches |
| Width | 8.3 Inches |
| Part Number | 408015RACBK |
More information #ad
9. YITAMOTOR
#adBolt On Design, Universal Chrome Polished Diesel Tailpipe Tip, YITAMOTOR 4 to 8 Inch Exhaust Tip, Rolled Angle Cut, 4" Inlet 8" Outlet 15" Long Stainless Steel Professional Exhaust Tip
#adDimension: 4 inch inside diameter inlet, 15 inch overall length; universal for all 4" outlet outside diameter exhaust tailpipes, 8 inch outside diameter outlet, but NOT for 4" inside diameter tailpipes.
More information #ad
Thicker inner wall design makes your car sounds rumble and crackle, the chrome-plated exhaust tip features high strength, so you can enjoy the driving pleasure brought by the sounds, and polished finish makes your vehicle exhaust tube shine brightly and nicely. Notice: the outlet outside diameter of your exhaust tubing should be equal to the inlet inside diameter of the exhaust tip 4. 0 inch. Superior construction: made of stainless steel, durability & corrosion resistance.
| Brand | YITAMOTOR #ad |
| Manufacturer | YITAMOTOR #ad |
| Part Number | YTSET000102 |
| Model | YTSET000102 |
| Warranty | 1 Year Warranty |
More information #ad
10. A-KARCK
#adA-KARCK Exhaust Tailpipe Tip 4" Inlet 8" Outlet 15" Long Polished Bolt On Stainless Steel for Truck Tailpipe, Exhaust Tip 4" Inlet
#adMaterial: made of stainless steel to protect the existing tailpipe from corrosion and deformation.
More information #ad
Repeatedly polished surface prevents rain erosion. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. Appearance: the pure and elegant silver exterior can perfectly decorate your vehicle.| Brand | A-KARCK #ad |
| Manufacturer | A-KARCK #ad |
| Height | 15 Inches |
| Length | 8 Inches |
| Width | 8 Inches |
| Part Number | N-408015RACB |
More information #ad
