As an Amazon Associate I earn from qualifying purchases.
LABEAR #ad - 1 order for 1 Adapter. Convenient: by the 3mm hex key to adjusting the set screw position the adapter can used in any groove 1/4" hex-shank power bit to eliminate the need for expensive driver sockets in your tool collection at the shop.
Versatile: this impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece converter. It allows for easy, one-handed swapping between bits while working.
TEKTON #ad - Engineered for use with impact drivers. Made of high-performing 8660 Ni-Cr-Mo steel with a protective manganese phosphate finish. Spring-loaded detent ball securely latches onto sockets, preventing them from being dropped.
One adapter/reducer set for all your needs: our 4-piece impact-grade adapter and reducer kit includes 1/4"F to 3/8"M - 3/8"F to 1/4"M - 3/8"F to 1/2"M - 1/2"F to 3/8"M. Get a bigger bang for your buck: while other socket reducers are vulnerable to rust and corrosion, our adapters are treated with a rust-proof Manganese Phosphate coating.
Neiko #ad - Square drive converter. Drive bit adapter: 5 piece set includes 2 reducers in 3/8” female to 1/4” male and 1/2” to 3/8”, 3/8” to 1/2”, also includes 3 adapters in 1/4" Female to 3/8” Male, and 1/2" to 3/4 Inch to convert all your impacts to different size sockets.
Black oxide coating: the super tough black oxide coating finish on these socket drill adapters gives you a long lasting tool set that will stand the test of time and give you the most durable performance job after job.
Chrome vanadium steel: this socket adapter set is constructed of heavy duty drop forged and heat treated chrome vanadium steel for superior strength and durability to exceed and endure in all work conditions. Impact grade: this impact adapter reducer set has a specific impact grade design that is made exclusively for drivers, wrenches and ratchets to convert size up or down for your automotive needs in the garage.
VictorsHome #ad - If you have any questions about this product, construction, cordless or pneumatic impact wrench or driver. Keep sockets secure - the spring-loaded detent ball system locks the socket into place for security and prevents it from dropping, meanwhile, the detent notches at the end of the drive grips tightly onto ratchets and extension bars.
High-torque - the radius corner inside the drive reduces wear and increases the torque of the fastener, avoiding cracking from stress concentrations.
HORUSDY #ad - These impact grade corrosion-resistant adapters are ideal for projects that increase torque and help prevent socket breakage and spalling. The spring ball bearings on each square head are securely locked in the socket to avoid slipping during use.
For example, components and materials that may come into contact with the extension rod during maintenance, such as oil and liquid, such as in the automotive field.1
Each socket adapter is made of heat-treated vanadium steel and black oxide coating with bracket torque compression to meet standard operating conditions. Socket adapters are ideal for car repair, DIY and most general home repairs. An external weatherproof coating provides additional protection against damage.
Mudder #ad - Sufficient supplies: the package comes with 10 square socket adapter bits, sufficient quantity can meet your daily needs and replacement. Bearing design: each square head of the 3/8 socket adapter has a spring ball bearing part, which can effectively fix the socket and avoid sliding.
Double size conversion: 10 mm hex impact socket can convert the original hexagonal polygon size to square head size, so you can use it to install the socket; It is a nice accessory for conversion, which improves work efficiency and brings many conveniences.
5 cm/ 2. 6 inch, easy to carry and store. Material: featuring quenched high-speed steel material, and the size of the hexagonal handle is about 6. 3 mm/ 1/4 inch; before placing an order, smooth, with high strength, and can be applied for a long time; The size of the square tip is about 10 mm/ 3/8 inch, the socket bit adapter is sturdy, please confirm the size to avoid an unpleasant shopping experience.
DEWALT #ad - Hardened steel body for increased durability. The product is manufactured in china. Easy and simple use kit. The product is 3/8 inch sock Adapter.
HTWORGRE #ad - So you can turn any power drill into a power nut driver with the extra reach you need. Compatibility the impact driver socket adapters are compatible with all brands of power drills, 3/8-inch, and the spring loaded detent ball design ensures the adapters to work securely with 1/4-inch, or 1/2-inch drive sockets.
Impact grade these impact grade corrosion-resistant adapters are perfect for increased torque projects, helping to prevent the breaking and stripping of sockets.
LEXIVON #ad - Get your set of adapters with zero risk – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind.
One set of socket adapters, unlimited uses – the ¼” hex shank will fit all quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers. Active rust & corrosion protection since they are treated with a rust-proof Black Phosphate coating for enhanced durability under any circumstances.
1. LABEAR
#adLaBear 3/8" Drive to 1/4" Hex Drive Quick Change Impact Adapter 3/8"DR to 1/4"H
#adVersatile: this impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece converter. It allows for easy, one-handed swapping between bits while working.
More information #ad
Note!!!!: size comes with 2 option !! buy 3/8"dr to 1/4"h = 1 adapter. Buy 1/2"dr to 1/4"h = 1 Adapter. Quick change & security lock design: 3/8" inch square Female to 1/4 Inch Hex Female Socket Adapter. Quality: made with chrome Molybdenum Steel for durability and the ability to withstand the high shock of impact drivers.| Brand | LABEAR #ad |
| Manufacturer | LOH TORNG HARDWARE MACHINE CO., LTD. #ad |
| Height | 70 Millimeters |
| Length | 48 Millimeters |
| Width | 31 Millimeters |
| Part Number | LB-PQR |
More information #ad
2. TEKTON
#adTEKTON 1/4 Inch Drive F x 3/8 Inch M Impact Adapter | SIA04101
#adMore information #ad
Multiplies the range and capability of your socket system. Through-hole in drive end locks onto drive tang. Converts 1/4 inch drive impact drivers to 3/8 inch drive.| Brand | TEKTON #ad |
| Manufacturer | TEKTON #ad |
| Height | 0.6 Inches |
| Length | 0.9 Inches |
| Weight | 0.04 Pounds |
| Width | 0.6 Inches |
| Part Number | SIA04101 |
| Model | SIA04101 |
| Warranty | No time limits, no receipts: tekton.com/tool-help |
More information #ad
3. LEXIVON
#adLEXIVON Impact Socket Adapter and Reducer 4-Piece Set | 1/4", 3/8", 1/2" Impact Driver Conversions, Chrome Molybdenum alloy steel LX-112
#adLEXIVON #ad - 100% problem-solving, 100% risk-free – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind.One adapter/reducer set for all your needs: our 4-piece impact-grade adapter and reducer kit includes 1/4"F to 3/8"M - 3/8"F to 1/4"M - 3/8"F to 1/2"M - 1/2"F to 3/8"M. Get a bigger bang for your buck: while other socket reducers are vulnerable to rust and corrosion, our adapters are treated with a rust-proof Manganese Phosphate coating.
More information #ad
Reduce fatigue & discomfort: the smart spring-loaded detent ball system will prevent dropping while the through-hole in the drive end will securely lock the adapter onto the drive tang. Unlike all those flimsy socket adapters our robust impact adapters and reducers are made from heat-treated Chrome Molybdenum alloy steel for enhanced durability.| Brand | LEXIVON #ad |
| Manufacturer | LEXIVON #ad |
| Height | 5.6 Inches |
| Length | 1.1 Inches |
| Width | 3.1 Inches |
| Part Number | LX-112 |
| Model | LX-112 |
More information #ad
4. Neiko
#ad1/4, 1/2" | Cr-V Steel | Impact Driver & Wrench Conversion Kit | Socket Reducer, Locking Socket Adapters, NEIKO 30249A Impact Adapter and Reducer Set | 5 Piece | Standard SAE Socket Adapter Sizes, 3/8
#adBlack oxide coating: the super tough black oxide coating finish on these socket drill adapters gives you a long lasting tool set that will stand the test of time and give you the most durable performance job after job.
More information #ad
Secure hold: the superior design includes a spring loaded ball detent that keeps your sockets locked into place and secure through holes that also allow the use of locking pins to ensure stability and supreme execution. Chrome vanadium steel: this socket adapter set is constructed of heavy duty drop forged and heat treated chrome vanadium steel for superior strength and durability to exceed and endure in all work conditions. Impact grade: this impact adapter reducer set has a specific impact grade design that is made exclusively for drivers, wrenches and ratchets to convert size up or down for your automotive needs in the garage.
| Brand | Neiko #ad |
| Manufacturer | Neiko #ad |
| Height | 1 Inches |
| Length | 2 Inches |
| Weight | 0.62 Pounds |
| Width | 3.5 Inches |
| Part Number | 3792988 |
| Model | 30249A |
More information #ad
5. VictorsHome
#adVictorsHome Impact Socket Adapter and Reducer 3/8 Inch Drive F to 1/4 Inch M, Chrome Molybdenum Steel Converter for Auto Construction
#adHigh-torque - the radius corner inside the drive reduces wear and increases the torque of the fastener, avoiding cracking from stress concentrations.
More information #ad
Size - the impact socket adapter is 3/8 Inch Drive F to 1/4 Inch M. Fit for most automotive, please feel free to contact us. Applications - this socket adapter is designed for impact use. Material - made of impact grade chrome molybdenum steel with black phosphate finish, provides excellent corrosion-resistant and durability. Can be used with a corded, industrial and mechanic work.| Brand | VictorsHome #ad |
| Manufacturer | VictorsHome #ad |
| Height | 0.75 Inches |
| Length | 1.06 Inches |
| Width | 0.75 Inches |
| Part Number | Z20210429W02 |
More information #ad
6. HORUSDY
#adHORUSDY 6-Piece Impact Grade Power Drill Sockets Adapter Sets, Socket to Drill Adapter 1/4" 3/8" 1/2" Impact Driver Adapter, 3-Inch and 6-Inch Hex Shank Impact Driver Socket Adapter
#adFor example, components and materials that may come into contact with the extension rod during maintenance, such as oil and liquid, such as in the automotive field.1
More information #ad
1/4" hex shank for all quick change drill chucks with three 3-inch-long socket adapters and three 6-inch-long socket adapters in 1/4" drives, 3/8" drives, and 1/2" drives. The perfect size makes it compatible with all brands of electric drill and screwdriver handle tools. Each socket adapter is made of heat-treated vanadium steel and black oxide coating with bracket torque compression to meet standard operating conditions. Socket adapters are ideal for car repair, DIY and most general home repairs. An external weatherproof coating provides additional protection against damage.
| Brand | HORUSDY #ad |
| Manufacturer | HORUSDY #ad |
| Height | 0.6 Inches |
| Length | 9 Inches |
| Width | 5.5 Inches |
| Part Number | 94311 |
More information #ad
7. Mudder
#ad10 Pieces Impact Adapter Square Socket Bit Adapter 1/4 Inch Hex Impact Socket for Drills, Extension Socket Driver Bits Impact Socket Adapter for Automotive DIY 3/8 Inch Square Tip
#adDouble size conversion: 10 mm hex impact socket can convert the original hexagonal polygon size to square head size, so you can use it to install the socket; It is a nice accessory for conversion, which improves work efficiency and brings many conveniences.
More information #ad
Apply to: this hex socket adapter is especially designed to be applied as a plug-in handle when manually driving applications or with power tools; The total length is about 6. 5 cm/ 2. 6 inch, easy to carry and store. Material: featuring quenched high-speed steel material, and the size of the hexagonal handle is about 6. 3 mm/ 1/4 inch; before placing an order, smooth, with high strength, and can be applied for a long time; The size of the square tip is about 10 mm/ 3/8 inch, the socket bit adapter is sturdy, please confirm the size to avoid an unpleasant shopping experience.
| Brand | Mudder #ad |
| Manufacturer | Mudder #ad |
| Part Number | TS-Mudder-20726 |
| Model | TS-Mudder-20726 |
More information #ad
8. DEWALT
#adDEWALT DW2542 1/4-Inch Hex Drive to 3/8-Inch Socket Adapter , Silver
#adMore information #ad
Adapts sockets for use in drills. Adapts sockets for use in drills. Hardened steel body for increased durability. Adapts sockets for use in drills. Use in drills. Adapts sockets for use in drills. Use in drills.| Brand | DEWALT #ad |
| Manufacturer | Dewalt #ad |
| Height | 1.87 Inches |
| Length | 0.52 Inches |
| Weight | 1 Kilograms |
| Width | 4.75 Inches |
| Part Number | DW2542 |
| Model | DW2542 |
| Warranty | 1 Year Full Warranty |
More information #ad
9. HTWORGRE
#adImpact Grade Socket Adapter 3 Pack Set, 1/4", Socket to Drill Adpater for Impact Drivers, and 1/2" Drive, 3/8", Turns Power Drill Into High Speed Nut Driver, DIYers, Tools Gift for Men
#adImpact grade these impact grade corrosion-resistant adapters are perfect for increased torque projects, helping to prevent the breaking and stripping of sockets.
More information #ad
Specifications the impact grade socket adapter set includes 3 adapters in a pack: 1 x 1/4-inch hex to 1/4-inch drive, 1 x 1/4-inch Hex to 3/8-inch Drive, 1 x 1/4-inch Hex to 1/2-inch Drive. High quality each adapter is made of heat-treated Chrome Vanadium Steel, and coated in Manganese Phosphate for industrial or mechanical use and meets or exceeds ANSI/ASME standards.| Brand | HTWORGRE #ad |
| Manufacturer | HTWORGRE #ad |
More information #ad
10. LEXIVON
#ad3/8", and 1/2" Drive, 3" Extension Bit With Holder | 3-Piece 1/4", LEXIVON 2-Pack Impact Grade Socket Adapter Set, Adapt Your Power Drill To High Torque Impact Wrench LX-101X2
#adOne set of socket adapters, unlimited uses – the ¼” hex shank will fit all quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers. Active rust & corrosion protection since they are treated with a rust-proof Black Phosphate coating for enhanced durability under any circumstances.
More information #ad
Enjoy our quality 2-pack saving package - The 3-inch impact grade driver socket adapters, made of heat-treated Chrome Vanadium steel and organized in a convenient holder. 1/4", 3/8" & 1/2" square drive - equipped with retention ball to prevent dropping, while the chamfered edges will ensure a secure fit onto the socket.| Brand | LEXIVON #ad |
| Manufacturer | LEXIVON #ad |
| Height | 0.6 Inches |
| Length | 3 Inches |
| Width | 3 Inches |
| Part Number | LX-101X2 |
| Model | LX-101X2 |
More information #ad
