Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! – NooElec Balun One Nine


NooElec Inc. Balun One Nine - 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use. Excellent specifications & low insertion loss. Only 39. 2mm x 13. 0mm and 5g! Meet 'balun one Nine', a small, cost-effective balun. The esd protection is excellent--it passes IEC61000-4-2, an 8kV contact discharge test, with a response time of just 300ps.

At 39. 2mm x 13. 0mm in total size including connectors! this balun was designed to be light in weight and light on your wallet. An excellent way to attach a long wire antenna to the Ham It Up, this 1:9 balun has an SMA output port and high-quality spring-type terminal block input for your coax. Very low insertion loss of -1.

Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - NooElec Balun One Nine - 3db typical, with a maximum input power of +28dBm. Balun one nine includes an antennaGuard varistor on the input, protecting your SDR setup from spurious ESD. Designed for hf applications, but specifications are accurate to frequencies up to 90MHz+.

More information about NooElec Inc. Balun One Nine

HF/MF/LF/VLF/ULF Upconverter w/TCXO & Separate Noise Source Circuit. Fully Assembled in Custom Metal Enclosure. Extends The Frequency Range of Your Favorite Radio Down to 300Hz. - Ham It Up Plus


NooElec Inc. Ham It Up Plus - Includes sma to sma connector to attach the output to your radio, black, tested, and an SMA to BNC antenna adapter. A separate noise source circuit is included for testing and calibration of various RF devices. Tune to 125mhz + +/- the tuning offset from the tuning procedure + your desired frequency and enjoy! A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz.

Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec. Ham it Up v1. 3: a 125mhz tcxo, custom built exclusively for nooelec by our taiwanese partner, is included and pre-installed, custom built for exclusively for nooelec by our japanese partner, which can be used for a number of rf projects, providing more accurate and stable tuning in any environment Ultra-low distortion ceramic capacitors, amplifiers and attenuators Form factor was kept identical to the Ham It Up, including calibration and tuning of filters, allowed us to extend the range of the Ham It Up Plus all the way down to 300Hz The separate noise source circuit is fully assembled, which means the same enclosure can be used note a new end panel may be required to accommodate the additional SMA connector of the noise source circuit Operation: Connect your antenna to the RF input Connect your SDR to the IF output Ensure your toggle switch is in the enable position Plug your USB power source into the USB-B USB jack Fire up your favorite SDR software.

HF/MF/LF/VLF/ULF Upconverter w/TCXO & Separate Noise Source Circuit. Fully Assembled in Custom Metal Enclosure. Extends The Frequency Range of Your Favorite Radio Down to 300Hz. - Ham It Up Plus - The ham it up plus is fully assembled in a custom, aluminum enclosure, and ready to use. For full product details and specifications, please visit the product page at nooelec. Com major differences vs.

More information about NooElec Inc. Ham It Up Plus


Similar products



DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches


DHT LLC RG032 - Package content : 1 x SMA Cable. Connector material:Pure Copper with Great connectivity. Not Alloy. The ham it up plus is fully assembled in a custom, aluminum enclosure, and ready to use. Includes sma to sma connector to attach the output to your radio, black, tested, and an SMA to BNC antenna adapter. A separate noise source circuit is included for testing and calibration of various RF devices.

Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately.

DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches - A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz. Impedance :50 ohm. Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec.

More information about DHT LLC RG032


Similar products



HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier


HiLetgo® 4330353723 - Package content : 1 x SMA Cable. Includes sma to sma connector to attach the output to your radio, black, tested, and an SMA to BNC antenna adapter. A separate noise source circuit is included for testing and calibration of various RF devices. 5. When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.

5 dB. Operating frequency01-2000mhz. Impedance :50 ohm. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. 01-2000mhz rf wide Band Amplifier. The ham it up plus is fully assembled in a custom, aluminum enclosure, and ready to use.

Features: -this product with wide frequency range, high gain, fm radio, remote control receiver, low noise figure -This product can be applied to various rf receive front-end and increases communication distance -Used for Short wave, such as cable TV signal amplifier need low noise rf signal amplification Specifications: Operating frequency0.

HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier - 1-2000mhz amplifier gain F=01mhz, gain=25db f=2000mhz, gain=29db f=1500mhz, gain=32db f=500mhz, gain=31db f=1000mhz, gain=20db maximum power output+10dBm 10mW Power supply voltage: 6-12 VDC System impedance50 Tips: 1. When working frequency is less than 500 MHZit get well gain flatness, can make it less than 1dB after careful adjustment.

More information about HiLetgo® 4330353723


Similar products



DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper


DZS Elec - High gain low Noise LNA Amplifier. Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Maximum power output+10dBm 10mW. Package content : 1 x SMA Cable. It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers. Connector: all-copper SMA Male to SMA Male adapter.

Connecting line: 15 cm RG316 military quality cable. High temperature resistance, acid resistance, corrosion resistance, high frequency low loss and low impedance. Wide applicability, easy to use, to ensure high quality communication. Package include: 2pcs rg316 SMA Male to SMA Male adapter with cable. Feature: adapter: sma male to sma male name: rf coaxial wire jumper type: patch cord, wire jumper Material: Copper Cable Type: RG316 high temperature cable Length: 15cm Impedance: 50 Ohm Applications: router, signal enhancer, antenna, Refit Cable, wireless adapter etc.

DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper - Operating frequency01-2000mhz. Impedance :50 ohm. Consisted of high quality rg316 cable and all copper SMA Male to SMA Male adapter, acid resistance, corrosion resistance, high temperature resistance, high frequency low loss and low impedance, to ensure high quality communication. Dht electronics brand is a registered trademark of DHT LLC.

More information about DZS Elec


Similar products



Broadcast AM Reject High Pass Filter 2.6 MHz HPF by RTL-SDR Blog


RTL-SDR Blog 4330366330 - Includes sma to sma connector to attach the output to your radio, black, tested, and an SMA to BNC antenna adapter. A separate noise source circuit is included for testing and calibration of various RF devices. Rtl-sdr blog broadcast AM Reject Filter. The ham it up plus is fully assembled in a custom, aluminum enclosure, and ready to use.

Maximum power output+10dBm 10mW. The 3 db roll-off point is between 2. 5 - 2. 6 mhz. Note, for RX use only. A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz. Note: for RX use only. Impedance :50 ohm. Works great with the direct sampling mode on our V3 dongles.

Broadcast AM Reject High Pass Filter 2.6 MHz HPF by RTL-SDR Blog - Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately. Includes 1x rtl-sdr blog broadcast am reject Filter Designed to block the broadcast AM band between 500 kHz - 1.

7 mhz with over 50 dB of attenuation. It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers.

More information about RTL-SDR Blog 4330366330


Similar products



RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas


RTL-SDR Blog - A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz. The short antennas are great for ADS-B, and the longer antennas work well at lower frequencies. High gain low Noise LNA Amplifier. Dipole set includes 1x dipole base with 60cm RG174, 1x suction cup mount.

Great for many applications including general radio scanning, adsb, air traffic control, meteor scatter monitoring, public safety radio, radio astronomy, APRS, POCSAG, ACARS, noaa apt weather satellites, weather balloons, trunked radio, DAB, P25 digital voice, or for use as a low cost panadapter with a traditional ham radio.

Several improvements over other brands including use of the r820t2 tuner, improved component tolerances, SMA F connector, aluminium shielded case with thermal pad for passive cooling, a 1 PPM temperature compensated oscillator TCXO, activatable bias tee circuit and a much improved antenna set. Can tune from 500 khz to 1.

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas - 7 ghz and has up to 3. 2 mhz of instantaneous bandwidth 2. 4 mhz stable. Comes with a multi-purpose dipole antenna kit which is perfect for beginners. Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec. When used in a v-dipole configuration the antenna works well for 137 MHz weather satellites and the ISS.

More information about RTL-SDR Blog


Similar products



DHT Electronics Handheld Antenna Cable SMA Male to UHF SO-239 Female Connectors 6'' Pack of 2


DHT LLC RG080 - Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec. Connector material:Pure Copper with Great connectivity. Not Alloy. Commonly used in rf applications, coaxial cable, wireless LAN Devices, Wi-Fi Radios External Antenna, Antennas, >1000 Times Mating Life Time. Cable length: 6 inches; cable type: Flexiable Coaxial Quality Low Loss RG316.

Connector material:Pure brass with Great connectivity. Not Alloy. Includes sma to sma connector to attach the output to your radio, black, tested, and an SMA to BNC antenna adapter. A separate noise source circuit is included for testing and calibration of various RF devices. Maximum power output+10dBm 10mW.

DHT Electronics Handheld Antenna Cable SMA Male to UHF SO-239 Female Connectors 6'' Pack of 2 - High gain low Noise LNA Amplifier. Package content : 1 x SMA Cable. Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately. The mounts and extension cable allow you to temporarily place the antenna outside for improved reception.

Package include:2 x SMA male to UHF female cables. The 3 db roll-off point is between 2.

More information about DHT LLC RG080


Similar products



SMA Adapter Connectivity Kit: 8 Adapters for NESDR RTL-SDR SMA Radios w/Case


NooElec Inc. NooElec SMA Adapter Connectivity Kit - Other names include 'belling-lee' and 'iec 61169-2' • SO-239 is also known as 'UHF'. Please note rtl-SDR dongles are RX only. The multipurpose portable dipole kit is great for beginners! Use it either for terrestrial or satellite reception just by changing the orientation of the antenna. Operating frequency0

1-2000mhz. Included: ✔ male sma to female n-connector adapter ✔ male sma to female f-connector adapter ✔ male sma to so-239 adapter ✔ male sma to female bnc adapter ✔ male sma to female mcx adapter ✔ male sMA to female PAL adapter ✔ Male SMA to female RP-SMA adapter ✔ Male SMA to male SMA adapter barrel connector ✔ Portable carrying case with 8 compartments Connector notes: • F-connector is also known as 'coax' or 'TV connector' in North America • PAL-connector is also known as 'TV connector' in Europe.

SMA Adapter Connectivity Kit: 8 Adapters for NESDR RTL-SDR SMA Radios w/Case - A high-quality rf ulf/vlf/lf/mf/hf converter for software defined radio devices like our NESDR series RTL-SDR and the HackRF--extends your radio range down to 300Hz. Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Connector material:Pure brass with Great connectivity. Not Alloy.

If there is no center pin, it is SMA. Ham it up plus has all the same fantastic features as the popular Ham It Up v1. 3, and shares an identical form factor to ensure compatibility with optional enclosures and Ham It Up addons available separately.

More information about NooElec Inc. NooElec SMA Adapter Connectivity Kit


Similar products



NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - NooElec Ham It Up v1.3


NooElec Inc. Ham It Up - Full operating instructions, specifications and features list are available on our website, nooelec. Com important note:ham it up enclosures designed for versions prior to v1. 3 will not work 100% with Ham It Up v1. 3. The mounts and extension cable allow you to temporarily place the antenna outside for improved reception.

Package include:2 x SMA male to UHF female cables. 8 male sma adapters in total, f-connector aka 'coax', allowing you to connect the following antenna types to your radio: N-connector, PAL, RP-SMA, SO-239 aka 'UHF' or 'PL-259', MCX, BNC, and SMA female. Dht electronics brand is a registered trademark of DHT LLC.

NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - NooElec Ham It Up v1.3 - Only authorized seller of DHT Electronics can sell under DHT Electronics listings. 01-2000mhz rf wide Band Amplifier. Please note rtl-SDR dongles are RX only. The multipurpose portable dipole kit is great for beginners! Use it either for terrestrial or satellite reception just by changing the orientation of the antenna.

Proudly made in the usa and Canada! Full 2 year product warranty, directly through NooElec. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.

More information about NooElec Inc. Ham It Up


Similar products



Distill:AM Barebones - Broadcast AM Bandstop Notch Filter for Software Defined Radio SDR Applications


NooElec Inc. Distill:AM Barebones - Operating frequency01-2000mhz. It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers. Connector: all-copper SMA Male to SMA Male adapter. Connecting line: 15 cm RG316 military quality cable. High temperature resistance, corrosion resistance, acid resistance, high frequency low loss and low impedance.

Wide applicability, easy to use, to ensure high quality communication. Package include: 2pcs rg316 SMA Male to SMA Male adapter with cable. Great for field use! ample room to house your NESDR SMArt or NESDR Nano SDR. Maximum power output+10dBm 10mW. Minimal out-of-band insertion loss means the filter can stay in place for most any application, though we do recommend removing Distill:AM from your setup when not listening to HF frequencies.

Distill:AM Barebones - Broadcast AM Bandstop Notch Filter for Software Defined Radio SDR Applications - The 3 db roll-off point is between 2. 5 - 2. 6 mhz. Designed and manufactured by NooElec in the United States. 8 male sma adapters in total, mcx, pal, f-connector aka 'coax', so-239 aka 'uhf' or 'pl-259', BNC, RP-SMA, allowing you to connect the following antenna types to your radio: N-connector, and SMA female.

Distill:am has its filter circuitry fully shielded with an EMI frame, and has its front end protected by an ESD diode meant for RF applications.

More information about NooElec Inc. Distill:AM Barebones


Similar products