Jonard ES-1964 Carbon Steel Electrician Scissor, For Heavy Duty Use


Jonard Industries ES-1964 - Special hardening process for greater durability and nickel plated for that professional look. Holds edge even when used on fiber and kevlar based cables. Made of high carbon steel with a special hardening process for greater durability and nickel plated for that professional look. The electrician Scissors are designed for heavy duty use.

A scraper and file are on the back of the blade. Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Electrician scissors are designed for heavy duty use. Holds edge even when used on fiber and kevlar based cables. The electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated.

Jonard ES-1964 Carbon Steel Electrician Scissor, For Heavy Duty Use - Made of high carbon steel.

More information about Jonard Industries ES-1964

Jonard KN-7 Ergonomic Cable Splicing Knife with Thermoplastic Rubber Handle, 6-1/4" Length


Jonard Industries KN-7 - Blade length is 1-3/4" and overall length is 6-1/4". The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Blade length is 1-3/4" and overall length is 6-1/4". It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

More information about Jonard Industries KN-7


Similar products



Jonard H-40 Leather Two Tool Pouch


Jonard Industries H-40 - Blade length is 1-3/4" and overall length is 6-1/4". Can be mounted on belts up to 2" wide. The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Can be mounted on belts up to 2" wide. Designed to hold an electrician's scissors and cable splicing knife. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

. Designed to hold an electrician's scissors and cable splicing knife.

More information about Jonard Industries H-40


Similar products



Jonard M-216C/EX Hex Outer Socket Can Wrench with Ergonomic 1" Diameter Handle, 7" Length


Jonard Industries M-216C/EX - The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

Double end can socket wrench, 3/8" and 7/16" hex, orange Impact resistant thermoplastic ergonomic handle. The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Can be mounted on belts up to 2" wide. Designed to hold an electrician's scissors and cable splicing knife.

Jonard M-216C/EX Hex Outer Socket Can Wrench with Ergonomic 1" Diameter Handle, 7" Length - Used in placing fuses in cable terminals and connecting wires to fuses and binding posts. Blade length is 1-3/4" and overall length is 6-1/4". 7" can wrench length. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

Can wrench with ergonomic 1" diameter handle and hex outer socket.

More information about Jonard Industries M-216C/EX


Similar products



Jonard ES-1964ERG Carbon Steel Ergonomic Electrician Scissor, For Heavy Duty Use


Jonard Industries ES-1964ERG - Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

A scraper and file are on the back of the blade. Special hardening process for greater durability and nickel plated for that professional look. Can be mounted on belts up to 2" wide. These ergonomic Electrician scissors are designed for heavy duty use. Electrician scissors are designed for heavy duty use. Made of high carbon steel.

Jonard ES-1964ERG Carbon Steel Ergonomic Electrician Scissor, For Heavy Duty Use - The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Notched to strip 19 and 23 AWG wire and one blade is serrated. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

A scraper and file are on the back of the blade.

More information about Jonard Industries ES-1964ERG


Similar products



WESTONETEK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools


WESTONETEK A0261 - Adjustable impact-force settings Lo/Hi for various cable termination applications. If after used a while the entry of the blaze is loose, you can use the impact- force settings to adjust it. Wide usage: inserts and cuts terminations in one simple operation for Cat6a /Cat6 /Cat5e /Cat5 Network Cable. Special hardening process for greater durability and nickel plated for that professional look.

Adjustable high and low actuation setting accommodates termination requirements or user preference. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and 66 blades.

WESTONETEK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools - . Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Suitabale for telephone and computer network installation and maintenance. This also means that when it is not loose, the setting is not adjustable. The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation.

Blade length is 1-3/4" and overall length is 6-1/4". Electrician scissors are designed for heavy duty use.

More information about WESTONETEK A0261


Similar products



Jonard JIC-22148 Combo Crimper Long Nose Plier with Yellow Plastic Handle, 6-7/8" Length


Jonard Industries JIC-22148 - Handle compartment for storing blade not in use. The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Torque capability: professional-Grade Impact tool with twist and lock sockets accommodates most blades for punch-down tools. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

Suitabale for telephone and computer network installation and maintenance. With a crusher, cutter, 0030" stripping hole and yellow plastic handle 6-7/8" long. Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors. A scraper and file are on the back of the blade. Blade length is 1-3/4" and overall length is 6-1/4".

Jonard JIC-22148 Combo Crimper Long Nose Plier with Yellow Plastic Handle, 6-7/8" Length - Adjustable impact-force settings Lo/Hi for various cable termination applications. Install wires easily into the Telephone Socket, CAT5e Faceplate or Patch Panel. Five tools in one, amp tel splice connectors, combines crimper for UR/UY/UG, 709 series connectors, crimping "B" type connectors and a long nose pliers.

Designed to hold an electrician's scissors and cable splicing knife. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

More information about Jonard Industries JIC-22148


Similar products



Jonard JIC-375 Three Hole Fiber Optic Stripper with TPR Handle, 6" Length


Jonard Industries JIC-375 - It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue. Three hole fiber Optic Stripper model performs all common fiber stripping functions. Special hardening process for greater durability and nickel plated for that professional look.

Blade length is 1-3/4" and overall length is 6-1/4". Ergonomic design: comfort grip that is easy to handle. With a crusher, cutter, 0030" stripping hole and yellow plastic handle. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

Jonard JIC-375 Three Hole Fiber Optic Stripper with TPR Handle, 6" Length - Three hole fiber Optic Stripper model performs all common fiber stripping functions. Suitabale for telephone and computer network installation and maintenance. 709 series connectors, crimping "B" type connectors and a long nose pliers. Handle is made of tPR Thermoplastic Rubber and tool is 6" long. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the glass fiber without nicks or scratches.

More information about Jonard Industries JIC-375


Similar products



Fluke Networks 10051501 D914 Impact Punch Down Tool with EverSharp 66/110 Plus Screwdriver Blade


Fluke Networks 10051501 - Use the spudger to remove the cross-connect module from the mounting bracket. Easy blade insertion, locks in place. Hook & spudger tools and blade storage are built into the handle. The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. Torque capability: professional-Grade Impact tool with twist and lock sockets accommodates most blades for punch-down tools.

It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue. It's the only impact tool that combines torque and impact in one tool. Blade length is 1-3/4" and overall length is 6-1/4". Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors.

Fluke Networks 10051501 D914 Impact Punch Down Tool with EverSharp 66/110 Plus Screwdriver Blade - Handle is made of tPR Thermoplastic Rubber and tool is 6" long. It also includes a built-in hook and spudger into the handle. Suitabale for telephone and computer network installation and maintenance. Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. Lifetime Warranty. 709 series connectors, crimping "B" type connectors and a long nose pliers.

More information about Fluke Networks 10051501


Similar products



Eclipse Tools 900-244 Pro'sKit Banjo Adapter, 4-6-8 Pin


Pro'sKit 900-244 - Designed to hold an electrician's scissors and cable splicing knife. Test equipment can be securely attached to the test pads using alligator clips. Individual conductors are broken out by pin number and correspond to eight separate test pads. Made of high carbon steel. 709 series connectors, crimping "B" type connectors and a long nose pliers.

Lifetime Warranty. Three hole fiber Optic Stripper model performs all common fiber stripping functions. Easy blade insertion, locks in place. Hook & spudger tools and blade storage are built into the handle. With a crusher, cutter, 0030" stripping hole and yellow plastic handle. Ergonomic design: comfort grip that is easy to handle.

Eclipse Tools 900-244 Pro'sKit Banjo Adapter, 4-6-8 Pin - Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors. Blade length is 1-3/4" and overall length is 6-1/4". Special hardening process for greater durability and nickel plated for that professional look. The mt-8091, in-line modular Adapter allows in-line testing for any plug/jack combination.

The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation. It holds its edge with repeated use and features a non-slip easy grip ergonomic handle made from TPR thermoplastic rubber for better control and reduced hand fatigue.

More information about Pro'sKit 900-244


Similar products



Jonard JIC-186 Kevlar Ergonomic Fiber Optic Cutter, 6" Length


Jonard Industries JIC-186 - 709 series connectors, crimping "B" type connectors and a long nose pliers. Ergonomic handles for user comfort and durability. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating. Blade length is 1-3/4" and overall length is 6-1/4". The tough cutlery steel blade is extremely sharp and cuts easily through many types of insulation.

Suitabale for telephone and computer network installation and maintenance. Adapter blade allows technician to use a variety of torque tool bits and sockets. Adjustable impact-force settings Lo/Hi for various cable termination applications. Easy blade insertion, locks in place. Hook & spudger tools and blade storage are built into the handle.

Jonard JIC-186 Kevlar Ergonomic Fiber Optic Cutter, 6" Length - Lifetime Warranty. High carbon stainless steel blades designed to cut Kevlar, cabling insulation, tape, cable ties and other material. Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors. Made of high carbon steel. Double end can socket wrench, 3/8" and 7/16" hex, orange impact resistant thermoplastic ergonomic handle^Used in placing fuses in cable terminals and connecting wires to fuses and binding posts^The walls on both sockets are thin enough so they can be used to work locking devices on most terminals and cabinets^7-inch can wrench length^Can wrench with ergonomic 1" diameter handle and hex outer socket.

Electrician scissors are notched to strip 19 and 23 AWG wire and one blade is serrated.

More information about Jonard Industries JIC-186


Similar products