13pcs Precision R8 Collets Set 1/8 – 7/8″ Mill Chuck Holder for Bridgeport .0006

Drawbar thread: 7/16"-20 Hardened and ground throughout. Accuracy. 0006" tir. Precision ground to close tolerance. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Item description: size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy. 0006" tir drawbar thread: 7/16"-20 material:65mn hardness:clamping part hrc 55-60 elastic part HRC 40-45 Applicable:This unit is applicable to all sorts of milling machines, which spindle taper hole is R8.

.

---

HFS Brand 58pc 5/8" Slot 1/2"-13 Stud HOLD DOWN CLAMP CLAMPING SET KIT BRIDGEPORT MILL

Includes: 24 studs 4 pieces of each 3", 6", 7", 4", 5", 8" long, 6 step block pairs.6 t-nuts, 6 end hold-downs, 4 coupling nuts, 6 flange nuts, Wall case. Table t-slot size: 5/8" stud size: 1/2"-13 T Nut No. Tn-0212 step clamp 25s-12, 40s-12, stb-2, 2pcs each size setp block: stb-1, 60S-12, STB-3 2pcs Each size High grade hardened steel.

Stud size: 1/2"-13. Table t-slot size: 5/8".


Similar products

---

360 Degree Swiveling Base - Hardened Metal - CNC Vise - Milling Machine Lockdown Vise - Install Bolt Included. Blue 4in

Highest clamping power. 4. Hfs tm brand, Only. The enclosed lead screw and sliding surface are harden and ground. It's very accurate and durable. Four setting positions of the jaw plates are available, widening the jaw plates opening. Table t-slot size: 5/8". The workplace does not move up, even if it is held at the top of the jaw plates.

Notice: This vice is very heavy. 3. Use highest quality ductile Iron 80000 PSI for minimum bending. This vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. Please double-check the dimensions provided below and in the photos to be sure it will work for you before ordering.

Model - 15979 jaw Width - 3. 93" jaw opening 3. 93" jaw height - 1. 26" base height - 1. 3" weight - 37lbs / 17kg High grade hardened steel. 5. 2.


Similar products

---

End Mill Set, 20 pieces 2 & 4 Flute, TiN coated HSS

The 3/16" through 7/16" end mills have a 3/8" shank. High grade hardened steel. 20 piece tin coated hss end mill set includes both 2 fluet and 4 flute end mills. The set comes in a fitted case. 20 piece tin coated HSS end mill set. The 1/2" and 9/16" end mills have a 1/2" shank. 3/16" to 3/4" by 16ths. Hfs tm brand, Only.

Made from the highest quality ductile Iron 80000 PSI for minimum bending. Center cutting. Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot. The 3/4" end mill has a 3/4" shank. Includes: 24 studs 4 pieces of each 3", 4", 7", 6", 8" long, 5", 6 step block pairs.6 t-nuts, 6 flange nuts, 6 end hold-downs, 4 coupling nuts, Wall case.

Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws. Table t-slot size: 5/8". Stud size: 1/2"-13. Includes both 2 flute and 4 flute end mills. Acme screws and easy to read 0-360deg scales. The 5/8" and 11/16" end mills have a 5/8" shank.


Similar products

---

Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip

Table t-slot size: 5/8". Hfs tm brand, Only. Used in a milling machine to find the workpiece edge. Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot. Includes: 24 studs 4 pieces of each 3", 6", 7", 8" long, 4", 5", 6 step block pairs.6 t-nuts, 6 flange nuts, 6 end hold-downs, 4 coupling nuts, Wall case.

Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws. Includes both 2 flute and 4 flute end mills. All working surfaces are hardened and ground. Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:. 200". Acme screws and easy to read 0-360deg scales. Stud size: 1/2"-13. Made from the highest quality ductile Iron 80000 PSI for minimum bending.

20 piece tin coated HSS end mill set. Center cutting. 3/16" to 3/4" by 16ths. High grade hardened steel.


Similar products

---

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip

High grade hardened steel. Used in a milling machine to find the workpiece edge. Stud size: 1/2"-13. 20 piece tin coated HSS end mill set. All working surfaces are hardened and ground. All working surfaces are hardened and ground. Made from the highest quality ductile Iron 80000 PSI for minimum bending. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Used in a milling machine to find the workpiece edge. 3/16" to 3/4" by 16ths. Includes both 2 flute and 4 flute end mills. Includes: 24 studs 4 pieces of each 3", 6", 5", 8" long, 7", 4", 6 step block pairs.6 t-nuts, 6 flange nuts, 6 end hold-downs, 4 coupling nuts, Wall case. Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws.

Table t-slot size: 5/8". Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder. Acme screws and easy to read 0-360deg scales. Hfs tm brand, Only.


Similar products

---

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

Top quality M2 HSS. All working surfaces are hardened and ground. 3/16" to 3/4" by 16ths. Made from the highest quality ductile Iron 80000 PSI for minimum bending. Includes both 2 flute and 4 flute end mills. Sizes 1, 3, 2, 4 and 5, 60° tip angles. Acme screws and easy to read 0-360deg scales. Table t-slot size: 5/8".

Includes: 24 studs 4 pieces of each 3", 6", 8" long, 5", 4", 7", 6 step block pairs.6 t-nuts, 6 end hold-downs, 6 flange nuts, 4 coupling nuts, Wall case. Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Sizes 1, 4 and 5, 3, 2, 60° tip angles.20 piece tin coated HSS end mill set. Hfs tm brand, Only. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge.

High grade hardened steel. Stud size: 1/2"-13.


Similar products

---

HHIP 3900-2112 58 Piece Clamping Kit 7/16 Inch T-Slot Stud Size 3/8-16

Used in a milling machine to find the workpiece edge. Fits small milling machines and tables. Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. 5" and 6" studs, 6 forged steel step clamps, 6 flanged nuts, 6 t-nuts, 4 coupling nuts, 12 steel step blocks and 1 wall rack.

Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Includes 4 each of 3", 4". Made of powered casting steel for stronger strength. All parts are heat treated. Acme screws and easy to read 0-360deg scales. 20 piece tin coated HSS end mill set. All working surfaces are hardened and ground.

Top quality M2 HSS. 58 piece clamping kit for a 7/16" t-slot ~ stud size is 3/8"-16 ~ Made of powered casting steel for stronger strength. Table t-slot size: 5/8". Includes: 24 studs 4 pieces of each 3", 8" long, 6", 4", 7", 5", 6 step block pairs.6 t-nuts, 6 flange nuts, 6 end hold-downs, 4 coupling nuts, Wall case.




Similar products

---

BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks

Top quality M2 HSS. Precision ground. Includes both 2 flute and 4 flute end mills. Made from the highest quality ductile Iron 80000 PSI for minimum bending. Squareness of all sides is within. 0002 per inch. Hfs tm brand, Only. All working surfaces are hardened and ground. High grade hardened steel. Acme screws and easy to read 0-360deg scales.

Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. All parts heat treated. 20 piece tin coated HSS end mill set. Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Heat treated above 48 Rockwell "C";. 0001 to. 0003 over allowance for nominal lapping. Sizes 1, 2, 3, 4 and 5, 60° tip angles. Table slot 7/16". All working surfaces are hardened and ground. Center cutting.


Similar products

---

Keyless 1/32"- 5/8" Drill Chuck With R8 Shank Adapter

Used in a milling machine to find the workpiece edge. Accuracy: 0005". Stud size: 1/2"-13. Top quality M2 HSS. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Clamping range: 1/32" -5/8". Shank taper: R8. All working surfaces are hardened and ground.

3/16" to 3/4" by 16ths. 20 piece tin coated HSS end mill set. All parts heat treated. Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot. Hfs tm brand, Only. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Stud size 3/8"-16.

Used in a milling machine to find the workpiece edge. Table t-slot size: 5/8". Center cutting. Special quenching treated key parts increases durability. Acme screws and easy to read 0-360deg scales. Suitable for drill presses or lathes spindle accepts R8 Arbor.


Similar products

---

Steelex M1096 Fly Cutter Set with Tool Bits

Acme screws and easy to read 0-360deg scales. Hfs tm brand, Only. All working surfaces are hardened and ground. Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge. Black oxide finish. 20 piece tin coated HSS end mill set. Accuracy: 0005". 3/16" to 3/4" by 16ths.

Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Stud size: 1/2"-13. 1/2-inch Shank. Top quality M2 HSS. Includes: 24 studs 4 pieces of each 3", 6", 7", 5", 4", 8" long, 6 step block pairs.6 t-nuts, 6 end hold-downs, 4 coupling nuts, 6 flange nuts, Wall case.

Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws. Sizes 1, 2, 4 and 5, 3, 60° tip angles. Table slot 7/16". All parts heat treated. Made from the highest quality ductile Iron 80000 PSI for minimum bending. Case hardened.


Similar products